...at http://www.mirandabanda.org/files/Cog/VM/VM.r2496/.
CogVM binaries as per VMMaker.oscog-eem.128/r2496 Fix regression in object-as-method/cannot-interpret for single and polymorphic inline cache misses (lookup:for:methodAndErrorSelectorInto:). Fix formatting bugette in context printing.
This fixes a regression in objects-as-methods which Nicholas was suffering from as a crash during Run Coverage in the Test Runner.
Eliot,
using this version of the vm I ran into a problem. I have a bunch of Unit-Tests and after some iterations of running them, the vm just freezes. So I can't say where it's happening. Sending USR1 won't give a stack dump, but I tried to get a backtrace using gdb.
Alex
Program received signal SIGSEGV, Segmentation fault. 0x08062f5c in remap (oop=2007759384) at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:39851 39851 in /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c (gdb) bt #0 0x08062f5c in remap (oop=2007759384) at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:39851 #1 0x0809057e in remapIfObjectRefpchasYoung (annotation=7, mcpc=0x760e970f "\211Ӊ\340\001u\022\213\003\301\350\n\203\340|u\017\213K\374\203\341\374\353\r\271\214\002dv\353\006\213\210<\025\025v\211ʉ\354]\302\004", hasYoungPtr=-1074411928) at /home/eliot/oscogvm/src/vm/cogit.c:15309 #2 0x08085268 in mapForperformUntilarg (cogMethod=<value optimized out>, functionSymbol=0x80904e0 <remapIfObjectRefpchasYoung>, arg=-1074411928) at /home/eliot/oscogvm/src/vm/cogit.c:13517 #3 0x08090882 in mapObjectReferencesInMachineCodeForIncrementalGC (gcMode=2) at /home/eliot/oscogvm/src/vm/cogit.c:13743 #4 mapObjectReferencesInMachineCode (gcMode=2) at /home/eliot/oscogvm/src/vm/cogit.c:13775 #5 0x080668cf in mapPointersInObjectsFromto (memStart=2005795252, memEnd=2007924496) at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:20227 #6 0x0806755a in incCompBody () at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:17099 #7 0x08074a55 in incrementalGC () at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:17458 #8 0x08074d9f in sufficientSpaceAfterGC (minFree=-279448528) at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:43265 #9 0x08077c21 in checkForEventsMayContextSwitch (mayContextSwitch=1) at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:11223 #10 0x08077e01 in handleStackOverflowOrEventAllowContextSwitch (mayContextSwitch=24) at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:16950 #11 0x08078f53 in activateCoggedNewMethod (inInterpreter=0) at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:8547 #12 0x080799c6 in ceSendFromInLineCacheMiss (oPIC=0x76100268) at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:10663 #13 0x76100365 in ?? () #14 0x08081bf4 in initStackPagesAndInterpret () at /home/eliot/oscogvm/src/vm/gcc3x-cointerp.c:18004 #15 0x0805c3ba in main (argc=Cannot access memory at address 0x18 ) at /home/eliot/oscogvm/platforms/unix/vm/sqUnixMain.c:1764
2011/9/28 Eliot Miranda eliot.miranda@gmail.com:
...at http://www.mirandabanda.org/files/Cog/VM/VM.r2496/.
CogVM binaries as per VMMaker.oscog-eem.128/r2496 Fix regression in object-as-method/cannot-interpret for single and polymorphic inline cache misses (lookup:for:methodAndErrorSelectorInto:). Fix formatting bugette in context printing.
This fixes a regression in objects-as-methods which Nicholas was suffering from as a crash during Run Coverage in the Test Runner.
best, Eliot
The same thing seems to happen also on Windows with the same vm version. Here I could capture a crash.dmp file.
Alex
At Wed, 28 Sep 2011 13:47:22 -0700, Eliot Miranda wrote:
...at http://www.mirandabanda.org/files/Cog/VM/VM.r2496/.
CogVM binaries as per VMMaker.oscog-eem.128/r2496 Fix regression in object-as-method/cannot-interpret for single and polymorphic inline cache misses (lookup:for:methodAndErrorSelectorInto:). Fix formatting bugette in context printing.
This fixes a regression in objects-as-methods which Nicholas was suffering from as a crash during Run Coverage in the Test Runner.
This probably is not an issue with the latest VM, and I now remember the discussion related to my question here:
http://forum.world.st/working-directory-under-Mac-OS-X-td3550987.html http://forum.world.st/Problems-with-Mac-VM-5-7-and-5-8-on-the-command-line-t...
but I'm not sure the current consensus is and let me ask it in the context of my problem.
So, the switch apparently happened sometime after 'Croquet Closure Cog VM [CoInterpreter VMMaker.oscog-eem.56] Croquet Cog 3.0.0', which I have been using for a project. When I try to switch to the latest version of VM, there are (at least) two things that has changed.
One is that
OSProcess thisOSProcess processAccessor primGetCurrentWorkingDirectory
now returns '/'. I used to launch an external command by:
PipeableOSProcess command: './demo'.
it stopped working. Is this just a known issue, and I should just use longer interface to OSProcess with cwd explicitly specified?
Another is our custom VM plugin (.bundle) file in the same directory cannot be found anymore. It works if I copy it into Resources directory; but it is inconvenient.
What are the suggested solutions for these problems? Thanks!
-- Yoshiki
On Fri, Sep 30, 2011 at 03:27:44PM -0700, Yoshiki Ohshima wrote:
At Wed, 28 Sep 2011 13:47:22 -0700, Eliot Miranda wrote:
...at?http://www.mirandabanda.org/files/Cog/VM/VM.r2496/.
CogVM binaries as per VMMaker.oscog-eem.128/r2496 Fix regression in object-as-method/cannot-interpret for single and polymorphic inline cache misses (lookup:for:methodAndErrorSelectorInto:). Fix formatting bugette in context printing.
This fixes a regression in objects-as-methods which Nicholas was suffering from as a crash during Run Coverage in the Test Runner.
This probably is not an issue with the latest VM, and I now remember the discussion related to my question here:
http://forum.world.st/working-directory-under-Mac-OS-X-td3550987.html http://forum.world.st/Problems-with-Mac-VM-5-7-and-5-8-on-the-command-line-t...
but I'm not sure the current consensus is and let me ask it in the context of my problem.
So, the switch apparently happened sometime after 'Croquet Closure Cog VM [CoInterpreter VMMaker.oscog-eem.56] Croquet Cog 3.0.0', which I have been using for a project. When I try to switch to the latest version of VM, there are (at least) two things that has changed.
One is that
OSProcess thisOSProcess processAccessor primGetCurrentWorkingDirectory
now returns '/'. I used to launch an external command by:
PipeableOSProcess command: './demo'.
it stopped working. Is this just a known issue, and I should just use longer interface to OSProcess with cwd explicitly specified?
I do not have a mac to test, but in case it may help:
The primGetCurrentWorkingDirectory method calls the C library function getcwd(), which answers the current working directory of the calling process (i.e. the process in which the VM is running). If the result is '/' then I suspect there is something about the way the VM is being launched that causes it to think it is running from the root directory, or perhaps a chroot() is being done.
Unix systems also usually have a shell variable $PWD that points to the current working directory. You can read its value with 'OSProcess thisOSProcess environmentAt: #PWD'. On my system (Linux) this gives the same result as primGetCurrentWorkingDirectory, but possibly it will give the result you need on OS X.
By the way, you can also call primGetCurrentWorkingDirectory with 'OSProcess thisOSProcess getCwd'.
Dave
Another is our custom VM plugin (.bundle) file in the same directory cannot be found anymore. It works if I copy it into Resources directory; but it is inconvenient.
What are the suggested solutions for these problems? Thanks!
-- Yoshiki
Hi, Dave,
At Fri, 30 Sep 2011 23:47:16 -0400, David T. Lewis wrote:
On Fri, Sep 30, 2011 at 03:27:44PM -0700, Yoshiki Ohshima wrote:
At Wed, 28 Sep 2011 13:47:22 -0700, Eliot Miranda wrote:
...at?http://www.mirandabanda.org/files/Cog/VM/VM.r2496/.
CogVM binaries as per VMMaker.oscog-eem.128/r2496 Fix regression in object-as-method/cannot-interpret for single and polymorphic inline cache misses (lookup:for:methodAndErrorSelectorInto:). Fix formatting bugette in context printing.
This fixes a regression in objects-as-methods which Nicholas was suffering from as a crash during Run Coverage in the Test Runner.
This probably is not an issue with the latest VM, and I now remember the discussion related to my question here:
http://forum.world.st/working-directory-under-Mac-OS-X-td3550987.html http://forum.world.st/Problems-with-Mac-VM-5-7-and-5-8-on-the-command-line-t...
but I'm not sure the current consensus is and let me ask it in the context of my problem.
So, the switch apparently happened sometime after 'Croquet Closure Cog VM [CoInterpreter VMMaker.oscog-eem.56] Croquet Cog 3.0.0', which I have been using for a project. When I try to switch to the latest version of VM, there are (at least) two things that has changed.
One is that
OSProcess thisOSProcess processAccessor primGetCurrentWorkingDirectory
now returns '/'. I used to launch an external command by:
PipeableOSProcess command: './demo'.
it stopped working. Is this just a known issue, and I should just use longer interface to OSProcess with cwd explicitly specified?
I do not have a mac to test, but in case it may help:
The primGetCurrentWorkingDirectory method calls the C library function getcwd(), which answers the current working directory of the calling process (i.e. the process in which the VM is running). If the result is '/' then I suspect there is something about the way the VM is being launched that causes it to think it is running from the root directory, or perhaps a chroot() is being done.
Yes, as quoted in http://forum.world.st/working-directory-under-Mac-OS-X-td3550987.html, running the VM at '/' was a conscious decision. Sorry for not clearly asking a question. My question was that how people deal with this change, when the change has apparent drawback in a case such as this. (Say, you want to distribute your application as a single directory, the natural place to put an external executable is somewhere under the directory. But now cwd is '/', you need to supply the current directory.)
In my code, I already made a change so that instead of using #command:, I now call #command:environment:workingDir:input:output:error:errorPipelineStream:. from a convenience method. Perhaps just having a variation of #command: that invokes command in the image directory would be handy.
Unix systems also usually have a shell variable $PWD that points to the current working directory. You can read its value with 'OSProcess thisOSProcess environmentAt: #PWD'. On my system (Linux) this gives the same result as primGetCurrentWorkingDirectory, but possibly it will give the result you need on OS X.
$PWD is certainly the same as the VMs cwd (checked with lsof command). I get nil for environmentAt: #PWD.
By the way, you can also call primGetCurrentWorkingDirectory with 'OSProcess thisOSProcess getCwd'.
Ah, thanks!
-- Yoshiki
On 03.10.2011, at 19:14, Yoshiki Ohshima wrote:
Hi, Dave,
At Fri, 30 Sep 2011 23:47:16 -0400, David T. Lewis wrote:
On Fri, Sep 30, 2011 at 03:27:44PM -0700, Yoshiki Ohshima wrote:
At Wed, 28 Sep 2011 13:47:22 -0700, Eliot Miranda wrote:
...at?http://www.mirandabanda.org/files/Cog/VM/VM.r2496/.
CogVM binaries as per VMMaker.oscog-eem.128/r2496 Fix regression in object-as-method/cannot-interpret for single and polymorphic inline cache misses (lookup:for:methodAndErrorSelectorInto:). Fix formatting bugette in context printing.
This fixes a regression in objects-as-methods which Nicholas was suffering from as a crash during Run Coverage in the Test Runner.
This probably is not an issue with the latest VM, and I now remember the discussion related to my question here:
http://forum.world.st/working-directory-under-Mac-OS-X-td3550987.html http://forum.world.st/Problems-with-Mac-VM-5-7-and-5-8-on-the-command-line-t...
but I'm not sure the current consensus is and let me ask it in the context of my problem.
So, the switch apparently happened sometime after 'Croquet Closure Cog VM [CoInterpreter VMMaker.oscog-eem.56] Croquet Cog 3.0.0', which I have been using for a project. When I try to switch to the latest version of VM, there are (at least) two things that has changed.
One is that
OSProcess thisOSProcess processAccessor primGetCurrentWorkingDirectory
now returns '/'. I used to launch an external command by:
PipeableOSProcess command: './demo'.
it stopped working. Is this just a known issue, and I should just use longer interface to OSProcess with cwd explicitly specified?
I do not have a mac to test, but in case it may help:
The primGetCurrentWorkingDirectory method calls the C library function getcwd(), which answers the current working directory of the calling process (i.e. the process in which the VM is running). If the result is '/' then I suspect there is something about the way the VM is being launched that causes it to think it is running from the root directory, or perhaps a chroot() is being done.
Yes, as quoted in http://forum.world.st/working-directory-under-Mac-OS-X-td3550987.html, running the VM at '/' was a conscious decision. Sorry for not clearly asking a question. My question was that how people deal with this change, when the change has apparent drawback in a case such as this. (Say, you want to distribute your application as a single directory, the natural place to put an external executable is somewhere under the directory. But now cwd is '/', you need to supply the current directory.)
In my code, I already made a change so that instead of using #command:, I now call #command:environment:workingDir:input:output:error:errorPipelineStream:. from a convenience method. Perhaps just having a variation of #command: that invokes command in the image directory would be handy.
I don't see the problem. Just give it an absolute path to the executable. You already know that the binary is in your image folder. cwd is pretty much irrelevant for that, no?
- Bert -
At Mon, 3 Oct 2011 19:18:59 +0200, Bert Freudenberg wrote:
On 03.10.2011, at 19:14, Yoshiki Ohshima wrote:
Hi, Dave,
At Fri, 30 Sep 2011 23:47:16 -0400, David T. Lewis wrote:
On Fri, Sep 30, 2011 at 03:27:44PM -0700, Yoshiki Ohshima wrote:
At Wed, 28 Sep 2011 13:47:22 -0700, Eliot Miranda wrote:
...at?http://www.mirandabanda.org/files/Cog/VM/VM.r2496/.
CogVM binaries as per VMMaker.oscog-eem.128/r2496 Fix regression in object-as-method/cannot-interpret for single and polymorphic inline cache misses (lookup:for:methodAndErrorSelectorInto:). Fix formatting bugette in context printing.
This fixes a regression in objects-as-methods which Nicholas was suffering from as a crash during Run Coverage in the Test Runner.
This probably is not an issue with the latest VM, and I now remember the discussion related to my question here:
http://forum.world.st/working-directory-under-Mac-OS-X-td3550987.html http://forum.world.st/Problems-with-Mac-VM-5-7-and-5-8-on-the-command-line-t...
but I'm not sure the current consensus is and let me ask it in the context of my problem.
So, the switch apparently happened sometime after 'Croquet Closure Cog VM [CoInterpreter VMMaker.oscog-eem.56] Croquet Cog 3.0.0', which I have been using for a project. When I try to switch to the latest version of VM, there are (at least) two things that has changed.
One is that
OSProcess thisOSProcess processAccessor primGetCurrentWorkingDirectory
now returns '/'. I used to launch an external command by:
PipeableOSProcess command: './demo'.
it stopped working. Is this just a known issue, and I should just use longer interface to OSProcess with cwd explicitly specified?
I do not have a mac to test, but in case it may help:
The primGetCurrentWorkingDirectory method calls the C library function getcwd(), which answers the current working directory of the calling process (i.e. the process in which the VM is running). If the result is '/' then I suspect there is something about the way the VM is being launched that causes it to think it is running from the root directory, or perhaps a chroot() is being done.
Yes, as quoted in http://forum.world.st/working-directory-under-Mac-OS-X-td3550987.html, running the VM at '/' was a conscious decision. Sorry for not clearly asking a question. My question was that how people deal with this change, when the change has apparent drawback in a case such as this. (Say, you want to distribute your application as a single directory, the natural place to put an external executable is somewhere under the directory. But now cwd is '/', you need to supply the current directory.)
In my code, I already made a change so that instead of using #command:, I now call #command:environment:workingDir:input:output:error:errorPipelineStream:. from a convenience method. Perhaps just having a variation of #command: that invokes command in the image directory would be handy.
I don't see the problem. Just give it an absolute path to the executable. You already know that the binary is in your image folder. cwd is pretty much irrelevant for that, no?
Well, as I wrote, that is what I did. The API to OSProcess was not designed this in mind, and the plugin loading became an issue also.
It is not a big deal, but I wondered how other people dealt with the "problem".
-- Yoshiki
vm-dev@lists.squeakfoundation.org