Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11. VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.com wrote:

Here is the crash dump from the Cog VM

---

From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

...

I am running the Cog image on the stock Squeak 4.1 vm. I was testing the

...

Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

Is it possible someone has generated another experimental VM for revision 16? I am hoping so. I have attempted to make with cygwin with poor results. Here is what I did:

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1)

2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz
3. Download VMMaker-oscog.16.mcz
4. Download Cog-eem.40.mcz
5. Read README and cygwinbuild\HowToBuild
6. Try to svn checkout code (platforms, src, cygwinbuild)
   • ERROR svn: OPTIONS of 'https://dev.qwaq.com/svn/XXX/trunk/platforms':

Could not resolv e hostname `dev.qwaq.com': The requested name is valid, but no data of the reque sted type was found. (https://dev.qwaq.com) 7. Since platforms and src are already there, try make. Command prompt - cd into cygwinbuild and make. Error listed below. 8. Run VMMaker-Squeak4.1.image image in image and regenerate sources. Had to edit the directory separator from '/' to ''. Regenerated sources. 9. Run make again and unsurprisingly get the same error.

Cygwinbuild make ERROR - C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll

---

The syntax of the command is incorrect. make: [build/vm] Error 1 (ignored) mkdir ./build/vm The syntax of the command is incorrect. make: *** [build/vm] Error 1

Cheers, Rob

---

The Modern Whig Party of Virginia - http://vawhigs.org

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Friday, June 25, 2010 1:13 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11.

VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.com wrote:

...

Here is the crash dump from the Cog VM

---

From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

...

I am running the Cog image on the stock Squeak 4.1 vm. I was testing the

...

Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Hi Rob,

your path is wrong. You should be picking up make and gcc 3.4.4 form your cygwin installation not from C:\GNUTools\bin\make.exe. Cog won't build with the old GNUTools. It needs cygwin with at least a gcc that supports sse2. 2.95 is alas too old.

So check that your commands are of the same or later version than

mcstalkerxp.cygwinbuild$ which make */usr/bin/make* mcstalkerxp.cygwinbuild$ make -v *GNU Make 3.81* Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This program built for i686-pc-cygwin mcstalkerxp.cygwinbuild$ which gcc */usr/bin/gcc* mcstalkerxp.cygwinbuild$ gcc -v Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specs Configured with: /managed/gcc-build/final-v3-bootstrap/gcc-3.4.4-999/configure --verbose --program-suffix=-3 --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc--libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,d,f77,pascal,java,objc --enable-nls --without-included-gettext --enable-version-specific-runtime-libs --without-x --enable-libgcj --disable-java-awt --with-system-zlib --enable-interpreter --disable-libgcj-debug --enable-threads=posix --enable-java-gc=boehm --disable-win32-registry --enable-sjlj-exceptions --enable-hash-synchronization --enable-libstdcxx-debugThread model: posix *gcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)*

cheers Eliot

On Sat, Jun 26, 2010 at 6:14 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

I tried what you suggest:

1. check-out http://www.squeakvm.org/svn/squeak/branches/Cog
2. build with Cygwin bash

It took some digging, but I found my "C" drive in the dir structure of cygwin and found Cog. I cd into cygwinbuild and 'make'. I get the following error:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32ap i -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accum ulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll -loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../sr c/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third- party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE _SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM _NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c cc1.exe: Invalid option `sse2' cc1.exe: Invalid option `win32' cc1.exe: Invalid option `ms-bitfields' cc1.exe: Invalid option `no-accumulate-outgoing-args' cc1.exe: bad value (pentium4) for -march= switch ../src/vm/gcc3x-cointerp.c:1335: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1434: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1452: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1485: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c: In function `callbackEnter': ../src/vm/gcc3x-cointerp.c:10544: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c:10545: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c: In function `highBit': ../src/vm/gcc3x-cointerp.c:17423: warning: left shift count >= width of type ../src/vm/gcc3x-cointerp.c:17424: warning: right shift count >= width of type ../src/vm/gcc3x-cointerp.c: In function `primitiveClockLogAddresses': ../src/vm/gcc3x-cointerp.c:24296: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c:24297: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c: In function `readImageFromFileHeapSizeStartingAt': ../src/vm/gcc3x-cointerp.c:40746: warning: assignment makes integer from pointer without a cast C:\GNUTools\bin\make.exe: *** [build/vm/gcc3x-cointerp.o] Error 1

Thanks, Rob

PS. The US lost [image: Sad smile emoticon] Good luck to England.

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Saturday, June 26, 2010 8:30 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.com wrote:

...

Hi Eliot,

Is it possible someone has generated another experimental VM for revision 16? I am hoping so. I have attempted to make with cygwin with poor results. Here is what I did:

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1)

...

2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz
3. Download VMMaker-oscog.16.mcz
4. Download Cog-eem.40.mcz
5. Read README and cygwinbuild\HowToBuild
6. Try to svn checkout code (platforms, src, cygwinbuild)
   • ERROR svn: OPTIONS of 'https://dev.qwaq.com/svn/XXX/trunk/platforms':

Could not resolv e hostname `dev.qwaq.com': The requested name is valid, but no data of the reque sted type was found. (https://dev.qwaq.com) 7. Since platforms and src are already there, try make. Command prompt - cd into cygwinbuild and make. Error listed below. 8. Run VMMaker-Squeak4.1.image image in image and regenerate sources. Had to edit the directory separator from '/' to ''. Regenerated sources. 9. Run make again and unsurprisingly get the same error.

Cygwinbuild make ERROR - C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll

---

The syntax of the command is incorrect. make: [build/vm] Error 1 (ignored) mkdir ./build/vm The syntax of the command is incorrect. make: *** [build/vm] Error 1

Cheers, Rob

---

The Modern Whig Party of Virginia - http://vawhigs.org

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Friday, June 25, 2010 1:13 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11.

VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.com wrote:

...

Here is the crash dump from the Cog VM

---

From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

...

I am running the Cog image on the stock Squeak 4.1 vm. I was testing the

...

Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Hi Rob,

you need to install the dx7 sdk, e.g. from http://www.brothersoft.com/games/directx-7.html. Build instructions updated accordingly.

cheers Eliot

On Sat, Jun 26, 2010 at 7:02 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

A little progress, followed by another issue. I did have gnutools installed. Removed it and fixed the PATH. Tried make. Unknown. It turns out cygwin does NOT install make and gcc by default. Went through the setup and hand selected make and gcc to be installed.

Now I can make. It started churning files. I got this error:

gcc -o build/vm/sqWin32DirectInput.o -isystem/usr/include/mingw -I/usr/include/w 32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-a ccumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -fun roll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I. ./src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/th ird-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_ FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/win32/vm/sqWin32DirectInp ut.c ../platforms/win32/vm/sqWin32DirectInput.c:31:1: warning: "HMONITOR_DECLARED" re defined In file included from /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32 api/windows.h:48, from ../platforms/win32/vm/sqWin32DirectInput.c:27: /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32api/windef.h:283:1: wa rning: this is the location of the previous definition ../platforms/win32/vm/sqWin32DirectInput.c:35:20: dinput.h: No such file or dire ctory ../platforms/win32/vm/sqWin32DirectInput.c:45: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:45: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c:46: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:46: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c: In function `InitDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:57: error: `DIPROPDWORD' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: (Each undeclared identifie r is reported only once ../platforms/win32/vm/sqWin32DirectInput.c:57: error: for each function it appea rs in.) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: parse error before "propWo rd" ../platforms/win32/vm/sqWin32DirectInput.c:64: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:64: error: `GUID_SysMouse' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:68: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:68: error: `c_dfDIMouse' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:72: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:74: error: `DISCL_NONEXCLUSIVE' undec lared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:75: error: `DISCL_BACKGROUND' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:79: error: `propWord' undeclared (fir st use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:80: error: `DIPROPHEADER' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:82: error: `DIPH_DEVICE' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:85: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:85: error: `DIPROP_BUFFERSIZE' undecl ared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:89: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `FreeDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:97: error: request for member `lpVtbl ' in something not a structure or union $ ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:102: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `DumpBufferedMouseTrail' : ../platforms/win32/vm/sqWin32DirectInput.c:110: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:110: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:117: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:119: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:123: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:125: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `GetBufferedMouseTrail':

../platforms/win32/vm/sqWin32DirectInput.c:144: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:144: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:166: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:168: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:172: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:174: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:195: error: `DIMOFS_X' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:196: error: `DIMOFS_Y' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:216: error: `DIMOFS_BUTTON0' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:217: error: `DIMOFS_BUTTON1' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:218: error: `DIMOFS_BUTTON2' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:219: error: `DIMOFS_BUTTON3' undeclar ed (first use in this function) make: *** [build/vm/sqWin32DirectInput.o] Error 1

Cheers, Rob

---

The Modern Whig Party of Virginia - http://vawhigs.org

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Saturday, June 26, 2010 9:33 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

your path is wrong.  You should be picking up make and gcc 3.4.4 form

your cygwin installation not from C:\GNUTools\bin\make.exe. Cog won't build with the old GNUTools. It needs cygwin with at least a gcc that supports sse2. 2.95 is alas too old.

So check that your commands are of the same or later version than

mcstalkerxp.cygwinbuild$ which make */usr/bin/make* mcstalkerxp.cygwinbuild$ make -v *GNU Make 3.81* Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This program built for i686-pc-cygwin mcstalkerxp.cygwinbuild$ which gcc */usr/bin/gcc* mcstalkerxp.cygwinbuild$ gcc -v Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specs Configured with: /managed/gcc-build/final-v3-bootstrap/gcc-3.4.4-999/configure --verbose --program-suffix=-3 --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc--libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,d,f77,pascal,java,objc --enable-nls --without-included-gettext --enable-version-specific-runtime-libs --without-x --enable-libgcj --disable-java-awt --with-system-zlib --enable-interpreter --disable-libgcj-debug --enable-threads=posix --enable-java-gc=boehm --disable-win32-registry --enable-sjlj-exceptions --enable-hash-synchronization --enable-libstdcxx-debugThread model: posix *gcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)*

cheers Eliot

On Sat, Jun 26, 2010 at 6:14 PM, Rob Withers reefedjib@yahoo.com wrote:

...

Hi Eliot,

I tried what you suggest:

1. check-out http://www.squeakvm.org/svn/squeak/branches/Cog
2. build with Cygwin bash

It took some digging, but I found my "C" drive in the dir structure of cygwin and found Cog. I cd into cygwinbuild and 'make'. I get the following error:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32ap i -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accum ulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll -loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../sr c/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third- party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE _SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM _NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c cc1.exe: Invalid option `sse2' cc1.exe: Invalid option `win32' cc1.exe: Invalid option `ms-bitfields' cc1.exe: Invalid option `no-accumulate-outgoing-args' cc1.exe: bad value (pentium4) for -march= switch ../src/vm/gcc3x-cointerp.c:1335: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1434: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1452: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1485: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c: In function `callbackEnter': ../src/vm/gcc3x-cointerp.c:10544: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c:10545: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c: In function `highBit': ../src/vm/gcc3x-cointerp.c:17423: warning: left shift count >= width of type ../src/vm/gcc3x-cointerp.c:17424: warning: right shift count >= width of type ../src/vm/gcc3x-cointerp.c: In function `primitiveClockLogAddresses': ../src/vm/gcc3x-cointerp.c:24296: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c:24297: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c: In function `readImageFromFileHeapSizeStartingAt': ../src/vm/gcc3x-cointerp.c:40746: warning: assignment makes integer from pointer without a cast C:\GNUTools\bin\make.exe: *** [build/vm/gcc3x-cointerp.o] Error 1

Thanks, Rob

PS. The US lost [image: Sad smile emoticon] Good luck to England.

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Saturday, June 26, 2010 8:30 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.com wrote:

...

Hi Eliot,

Is it possible someone has generated another experimental VM for revision 16? I am hoping so. I have attempted to make with cygwin with poor results. Here is what I did:

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1)

...

2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz
3. Download VMMaker-oscog.16.mcz
4. Download Cog-eem.40.mcz
5. Read README and cygwinbuild\HowToBuild
6. Try to svn checkout code (platforms, src, cygwinbuild)
   • ERROR svn: OPTIONS of '

https://dev.qwaq.com/svn/XXX/trunk/platforms': Could not resolv e hostname `dev.qwaq.com': The requested name is valid, but no data of the reque sted type was found. (https://dev.qwaq.com) 7. Since platforms and src are already there, try make. Command prompt

• cd into cygwinbuild and make. Error listed below.

8. Run VMMaker-Squeak4.1.image image in image and regenerate sources.

Had to edit the directory separator from '/' to ''. Regenerated sources. 9. Run make again and unsurprisingly get the same error.

Cygwinbuild make ERROR - C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll

---

The syntax of the command is incorrect. make: [build/vm] Error 1 (ignored) mkdir ./build/vm The syntax of the command is incorrect. make: *** [build/vm] Error 1

Cheers, Rob

---

The Modern Whig Party of Virginia - http://vawhigs.org

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Friday, June 25, 2010 1:13 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11.

VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.comwrote:

...

Here is the crash dump from the Cog VM

---

From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

...

I am running the Cog image on the stock Squeak 4.1 vm. I was testing

...

the Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Hi Rob,

that'll teach me to check-in without doing a test build. Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build.

cheers Eliot

On Sat, Jun 26, 2010 at 7:20 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

I have this in C:\dx7sdk. Do I need to include its path or something in cygwin or the gcc call?

Thanks, Rob

---

The Modern Whig Party of Virginia - http://vawhigs.org

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Saturday, June 26, 2010 10:18 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

you need to install the dx7 sdk, e.g. from

http://www.brothersoft.com/games/directx-7.html. Build instructions updated accordingly.

cheers Eliot

On Sat, Jun 26, 2010 at 7:02 PM, Rob Withers reefedjib@yahoo.com wrote:

...

Hey Eliot,

A little progress, followed by another issue. I did have gnutools installed. Removed it and fixed the PATH. Tried make. Unknown. It turns out cygwin does NOT install make and gcc by default. Went through the setup and hand selected make and gcc to be installed.

Now I can make. It started churning files. I got this error:

gcc -o build/vm/sqWin32DirectInput.o -isystem/usr/include/mingw -I/usr/include/w 32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-a ccumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -fun roll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I. ./src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/th ird-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_ FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/win32/vm/sqWin32DirectInp ut.c ../platforms/win32/vm/sqWin32DirectInput.c:31:1: warning: "HMONITOR_DECLARED" re defined In file included from /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32 api/windows.h:48, from ../platforms/win32/vm/sqWin32DirectInput.c:27: /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32api/windef.h:283:1: wa rning: this is the location of the previous definition ../platforms/win32/vm/sqWin32DirectInput.c:35:20: dinput.h: No such file or dire ctory ../platforms/win32/vm/sqWin32DirectInput.c:45: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:45: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c:46: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:46: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c: In function `InitDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:57: error: `DIPROPDWORD' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: (Each undeclared identifie r is reported only once ../platforms/win32/vm/sqWin32DirectInput.c:57: error: for each function it appea rs in.) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: parse error before "propWo rd" ../platforms/win32/vm/sqWin32DirectInput.c:64: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:64: error: `GUID_SysMouse' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:68: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:68: error: `c_dfDIMouse' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:72: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:74: error: `DISCL_NONEXCLUSIVE' undec lared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:75: error: `DISCL_BACKGROUND' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:79: error: `propWord' undeclared (fir st use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:80: error: `DIPROPHEADER' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:82: error: `DIPH_DEVICE' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:85: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:85: error: `DIPROP_BUFFERSIZE' undecl ared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:89: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `FreeDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:97: error: request for member `lpVtbl ' in something not a structure or union $ ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:102: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `DumpBufferedMouseTrail' : ../platforms/win32/vm/sqWin32DirectInput.c:110: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:110: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:117: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:119: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:123: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:125: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `GetBufferedMouseTrail':

../platforms/win32/vm/sqWin32DirectInput.c:144: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:144: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:166: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:168: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:172: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:174: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:195: error: `DIMOFS_X' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:196: error: `DIMOFS_Y' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:216: error: `DIMOFS_BUTTON0' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:217: error: `DIMOFS_BUTTON1' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:218: error: `DIMOFS_BUTTON2' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:219: error: `DIMOFS_BUTTON3' undeclar ed (first use in this function) make: *** [build/vm/sqWin32DirectInput.o] Error 1

Cheers, Rob

---

The Modern Whig Party of Virginia - http://vawhigs.org

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Saturday, June 26, 2010 9:33 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

your path is wrong.  You should be picking up make and gcc 3.4.4 form

your cygwin installation not from C:\GNUTools\bin\make.exe. Cog won't build with the old GNUTools. It needs cygwin with at least a gcc that supports sse2. 2.95 is alas too old.

So check that your commands are of the same or later version than

mcstalkerxp.cygwinbuild$ which make */usr/bin/make* mcstalkerxp.cygwinbuild$ make -v *GNU Make 3.81* Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This program built for i686-pc-cygwin mcstalkerxp.cygwinbuild$ which gcc */usr/bin/gcc* mcstalkerxp.cygwinbuild$ gcc -v Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specs Configured with: /managed/gcc-build/final-v3-bootstrap/gcc-3.4.4-999/configure --verbose --program-suffix=-3 --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc--libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,d,f77,pascal,java,objc --enable-nls --without-included-gettext --enable-version-specific-runtime-libs --without-x --enable-libgcj --disable-java-awt --with-system-zlib --enable-interpreter --disable-libgcj-debug --enable-threads=posix --enable-java-gc=boehm --disable-win32-registry --enable-sjlj-exceptions --enable-hash-synchronization --enable-libstdcxx-debugThread model: posix *gcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)*

cheers Eliot

On Sat, Jun 26, 2010 at 6:14 PM, Rob Withers reefedjib@yahoo.com wrote:

...

Hi Eliot,

I tried what you suggest:

1. check-out http://www.squeakvm.org/svn/squeak/branches/Cog
2. build with Cygwin bash

It took some digging, but I found my "C" drive in the dir structure of cygwin and found Cog. I cd into cygwinbuild and 'make'. I get the following error:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32ap i -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accum ulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll -loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../sr c/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third- party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE _SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM _NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c cc1.exe: Invalid option `sse2' cc1.exe: Invalid option `win32' cc1.exe: Invalid option `ms-bitfields' cc1.exe: Invalid option `no-accumulate-outgoing-args' cc1.exe: bad value (pentium4) for -march= switch ../src/vm/gcc3x-cointerp.c:1335: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1434: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1452: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1485: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c: In function `callbackEnter': ../src/vm/gcc3x-cointerp.c:10544: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c:10545: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c: In function `highBit': ../src/vm/gcc3x-cointerp.c:17423: warning: left shift count >= width of type ../src/vm/gcc3x-cointerp.c:17424: warning: right shift count >= width of type ../src/vm/gcc3x-cointerp.c: In function `primitiveClockLogAddresses': ../src/vm/gcc3x-cointerp.c:24296: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c:24297: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c: In function `readImageFromFileHeapSizeStartingAt': ../src/vm/gcc3x-cointerp.c:40746: warning: assignment makes integer from pointer without a cast C:\GNUTools\bin\make.exe: *** [build/vm/gcc3x-cointerp.o] Error 1

Thanks, Rob

PS. The US lost [image: Sad smile emoticon] Good luck to England.

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Saturday, June 26, 2010 8:30 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.comwrote:

...

Hi Eliot,

Is it possible someone has generated another experimental VM for revision 16? I am hoping so. I have attempted to make with cygwin with poor results. Here is what I did:

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1)

...

2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz
3. Download VMMaker-oscog.16.mcz
4. Download Cog-eem.40.mcz
5. Read README and cygwinbuild\HowToBuild
6. Try to svn checkout code (platforms, src, cygwinbuild)
   • ERROR svn: OPTIONS of '

https://dev.qwaq.com/svn/XXX/trunk/platforms': Could not resolv e hostname `dev.qwaq.com': The requested name is valid, but no data of the reque sted type was found. (https://dev.qwaq.com) 7. Since platforms and src are already there, try make. Command prompt

• cd into cygwinbuild and make. Error listed below.

8. Run VMMaker-Squeak4.1.image image in image and regenerate sources.

Had to edit the directory separator from '/' to ''. Regenerated sources. 9. Run make again and unsurprisingly get the same error.

Cygwinbuild make ERROR - C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll

---

The syntax of the command is incorrect. make: [build/vm] Error 1 (ignored) mkdir ./build/vm The syntax of the command is incorrect. make: *** [build/vm] Error 1

Cheers, Rob

---

The Modern Whig Party of Virginia - http://vawhigs.org

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Friday, June 25, 2010 1:13 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11.

VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.comwrote:

...

Here is the crash dump from the Cog VM

---

From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

...

I am running the Cog image on the stock Squeak 4.1 vm. I was testing

...

the Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Hi Eliot,

I did a little digging into the Makefile and platforms. In the Makefile I found:

DXDIR:= $(PLATDIR)/win32/third-party/dx9sdk/Include

So I ran over to platforms/win32 and I did NOT see a third-party directory.

Regards, Rob

From: Rob Withers Sent: Saturday, June 26, 2010 11:23 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------------

Eliot,

I am totally lost and quite annoyed at Microsoft at the moment.

I have dx7sdk, which I believe came from the WinTools (MingW) for building squeak on windows. This is "installed" on C:\dx7sdk. I do not believe there are any references to it in the environment variables. It is just 2 directories of files: include and lib. Somehow the MingW tools knew about it when building squeak on windows.

Cygwin knows nothing about these files. Now that I am doing a 'make' with cygwin, I think I need to somehow tell it about the includes and the libs.

I tried updating Cog with 'svn' but it just grabbed the HowToBuild. No other changes. I am unclear what you mean: "Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build".

I thought to grab dx9sdk thinking is was already setup for this in Cog. I tried to find it, and even attempted to d/l a Delphi dx9sdk, which looked all wrong. I ended up going to the borg and d/led their zip. It was 225MB!!! It dropped like a big hairy turd on my hard drive and I unzipped it and ran setup, thinking that maybe that will setup some environment variables of interest.

Went back to a new cygwin bash shell and tried make. Same result.

What should I do?

Thanks, Rob

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:49 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------------

Hi Rob,

that'll teach me to check-in without doing a test build. Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build.

cheers Eliot

On Sat, Jun 26, 2010 at 7:20 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

I have this in C:\dx7sdk. Do I need to include its path or something in cygwin or the gcc call?

Thanks, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:18 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------------

Hi Rob,

you need to install the dx7 sdk, e.g. from http://www.brothersoft.com/games/directx-7.html. Build instructions updated accordingly.

cheers Eliot

On Sat, Jun 26, 2010 at 7:02 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

A little progress, followed by another issue. I did have gnutools installed. Removed it and fixed the PATH. Tried make. Unknown. It turns out cygwin does NOT install make and gcc by default. Went through the setup and hand selected make and gcc to be installed.

Now I can make. It started churning files. I got this error:

gcc -o build/vm/sqWin32DirectInput.o -isystem/usr/include/mingw -I/usr/include/w 32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-a ccumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -fun roll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I. ./src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/th ird-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_ FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/win32/vm/sqWin32DirectInp ut.c ../platforms/win32/vm/sqWin32DirectInput.c:31:1: warning: "HMONITOR_DECLARED" re defined In file included from /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32 api/windows.h:48, from ../platforms/win32/vm/sqWin32DirectInput.c:27: /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32api/windef.h:283:1: wa rning: this is the location of the previous definition ../platforms/win32/vm/sqWin32DirectInput.c:35:20: dinput.h: No such file or dire ctory ../platforms/win32/vm/sqWin32DirectInput.c:45: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:45: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c:46: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:46: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c: In function `InitDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:57: error: `DIPROPDWORD' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: (Each undeclared identifie r is reported only once ../platforms/win32/vm/sqWin32DirectInput.c:57: error: for each function it appea rs in.) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: parse error before "propWo rd" ../platforms/win32/vm/sqWin32DirectInput.c:64: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:64: error: `GUID_SysMouse' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:68: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:68: error: `c_dfDIMouse' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:72: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:74: error: `DISCL_NONEXCLUSIVE' undec lared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:75: error: `DISCL_BACKGROUND' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:79: error: `propWord' undeclared (fir st use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:80: error: `DIPROPHEADER' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:82: error: `DIPH_DEVICE' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:85: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:85: error: `DIPROP_BUFFERSIZE' undecl ared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:89: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `FreeDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:97: error: request for member `lpVtbl ' in something not a structure or union $ ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:102: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `DumpBufferedMouseTrail' : ../platforms/win32/vm/sqWin32DirectInput.c:110: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:110: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:117: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:119: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:123: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:125: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `GetBufferedMouseTrail':

../platforms/win32/vm/sqWin32DirectInput.c:144: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:144: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:166: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:168: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:172: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:174: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:195: error: `DIMOFS_X' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:196: error: `DIMOFS_Y' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:216: error: `DIMOFS_BUTTON0' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:217: error: `DIMOFS_BUTTON1' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:218: error: `DIMOFS_BUTTON2' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:219: error: `DIMOFS_BUTTON3' undeclar ed (first use in this function) make: *** [build/vm/sqWin32DirectInput.o] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 9:33 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------------

Hi Rob,

your path is wrong. You should be picking up make and gcc 3.4.4 form your cygwin installation not from C:\GNUTools\bin\make.exe. Cog won't build with the old GNUTools. It needs cygwin with at least a gcc that supports sse2. 2.95 is alas too old.

So check that your commands are of the same or later version than

mcstalkerxp.cygwinbuild$ which make /usr/bin/make mcstalkerxp.cygwinbuild$ make -v GNU Make 3.81 Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This program built for i686-pc-cygwin mcstalkerxp.cygwinbuild$ which gcc /usr/bin/gcc mcstalkerxp.cygwinbuild$ gcc -v Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specs Configured with: /managed/gcc-build/final-v3-bootstrap/gcc-3.4.4-999/configure --verbose --program-suffix=-3 --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc--libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,d,f77,pascal,java,objc --enable-nls --without-included-gettext --enable-version-specific-runtime-libs --without-x --enable-libgcj --disable-java-awt --with-system-zlib --enable-interpreter --disable-libgcj-debug --enable-threads=posix --enable-java-gc=boehm --disable-win32-registry --enable-sjlj-exceptions --enable-hash-synchronization --enable-libstdcxx-debugThread model: posix gcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)

cheers Eliot

On Sat, Jun 26, 2010 at 6:14 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

I tried what you suggest: 1. check-out http://www.squeakvm.org/svn/squeak/branches/Cog 2. build with Cygwin bash

It took some digging, but I found my "C" drive in the dir structure of cygwin and found Cog. I cd into cygwinbuild and 'make'. I get the following error:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32ap i -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accum ulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll -loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../sr c/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third- party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE _SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM _NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c cc1.exe: Invalid option `sse2' cc1.exe: Invalid option `win32' cc1.exe: Invalid option `ms-bitfields' cc1.exe: Invalid option `no-accumulate-outgoing-args' cc1.exe: bad value (pentium4) for -march= switch ../src/vm/gcc3x-cointerp.c:1335: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1434: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1452: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1485: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c: In function `callbackEnter': ../src/vm/gcc3x-cointerp.c:10544: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c:10545: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c: In function `highBit': ../src/vm/gcc3x-cointerp.c:17423: warning: left shift count >= width of type ../src/vm/gcc3x-cointerp.c:17424: warning: right shift count >= width of type ../src/vm/gcc3x-cointerp.c: In function `primitiveClockLogAddresses': ../src/vm/gcc3x-cointerp.c:24296: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c:24297: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c: In function `readImageFromFileHeapSizeStartingAt': ../src/vm/gcc3x-cointerp.c:40746: warning: assignment makes integer from pointer without a cast C:\GNUTools\bin\make.exe: *** [build/vm/gcc3x-cointerp.o] Error 1

Thanks, Rob

PS. The US lost Good luck to England.

From: Eliot Miranda Sent: Saturday, June 26, 2010 8:30 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

Is it possible someone has generated another experimental VM for revision 16? I am hoping so. I have attempted to make with cygwin with poor results. Here is what I did:

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1) 2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz 3. Download VMMaker-oscog.16.mcz 4. Download Cog-eem.40.mcz 5. Read README and cygwinbuild\HowToBuild 6. Try to svn checkout code (platforms, src, cygwinbuild) - ERROR svn: OPTIONS of 'https://dev.qwaq.com/svn/XXX/trunk/platforms': Could not resolv e hostname `dev.qwaq.com': The requested name is valid, but no data of the reque sted type was found. (https://dev.qwaq.com) 7. Since platforms and src are already there, try make. Command prompt - cd into cygwinbuild and make. Error listed below. 8. Run VMMaker-Squeak4.1.image image in image and regenerate sources. Had to edit the directory separator from '/' to ''. Regenerated sources. 9. Run make again and unsurprisingly get the same error.

Cygwinbuild make ERROR - C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll ----------------------------------------------------- The syntax of the command is incorrect. make: [build/vm] Error 1 (ignored) mkdir ./build/vm The syntax of the command is incorrect. make: *** [build/vm] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Friday, June 25, 2010 1:13 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------

Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11. VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.com wrote:

Here is the crash dump from the Cog VM

-------------------------------------------------- From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

I am running the Cog image on the stock Squeak 4.1 vm. I was testing the Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Hey Eliot,

Cool. I got it and made more progress. Thanks! Here is the latest errors:

gcc -o build/vm/sqVirtualMachine.o -isystem/usr/include/mingw -I/usr/include/w32 api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-acc umulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funro ll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../ src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/thir d-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FI LE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -D VM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/Cross/vm/sqVirtualMachine.c

make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \ ../.././build/vm/ADPCMCodecPlugin.lib make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Cheers, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 12:29 AM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------------

On Sat, Jun 26, 2010 at 8:23 PM, Rob Withers reefedjib@yahoo.com wrote:

Eliot,

I am totally lost and quite annoyed at Microsoft at the moment.

I have dx7sdk, which I believe came from the WinTools (MingW) for building squeak on windows. This is "installed" on C:\dx7sdk. I do not believe there are any references to it in the environment variables. It is just 2 directories of files: include and lib. Somehow the MingW tools knew about it when building squeak on windows.

OK, but the Teleplace/Cog build on cygwin doesn't use c:\dx7sdk. It uses platforms/win32/third-party/dx9sdk. I've just added that to the Cog branch and if you update it should appear and the make should work. Here's the command that failed before:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c

Notice the -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include

It was my mistake that I omitted this from the tarball and the Cog branch. Apologies. But is is there now. So update (or if you haven't already check-out http://www.squeakvm.org/svn/squeak/branches/Cog) and you should make more progress.

HTH Eliot

Cygwin knows nothing about these files. Now that I am doing a 'make' with cygwin, I think I need to somehow tell it about the includes and the libs.

I tried updating Cog with 'svn' but it just grabbed the HowToBuild. No other changes. I am unclear what you mean: "Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build".

I thought to grab dx9sdk thinking is was already setup for this in Cog. I tried to find it, and even attempted to d/l a Delphi dx9sdk, which looked all wrong. I ended up going to the borg and d/led their zip. It was 225MB!!! It dropped like a big hairy turd on my hard drive and I unzipped it and ran setup, thinking that maybe that will setup some environment variables of interest.

Went back to a new cygwin bash shell and tried make. Same result.

What should I do?

Thanks, Rob

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:49 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------------

Hi Rob,

that'll teach me to check-in without doing a test build. Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build.

cheers Eliot

On Sat, Jun 26, 2010 at 7:20 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

I have this in C:\dx7sdk. Do I need to include its path or something in cygwin or the gcc call?

Thanks, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:18 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------------

Hi Rob,

you need to install the dx7 sdk, e.g. from http://www.brothersoft.com/games/directx-7.html. Build instructions updated accordingly.

cheers Eliot

On Sat, Jun 26, 2010 at 7:02 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

A little progress, followed by another issue. I did have gnutools installed. Removed it and fixed the PATH. Tried make. Unknown. It turns out cygwin does NOT install make and gcc by default. Went through the setup and hand selected make and gcc to be installed.

Now I can make. It started churning files. I got this error:

gcc -o build/vm/sqWin32DirectInput.o -isystem/usr/include/mingw -I/usr/include/w 32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-a ccumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -fun roll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I. ./src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/th ird-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_ FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/win32/vm/sqWin32DirectInp ut.c ../platforms/win32/vm/sqWin32DirectInput.c:31:1: warning: "HMONITOR_DECLARED" re defined In file included from /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32 api/windows.h:48, from ../platforms/win32/vm/sqWin32DirectInput.c:27: /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32api/windef.h:283:1: wa rning: this is the location of the previous definition ../platforms/win32/vm/sqWin32DirectInput.c:35:20: dinput.h: No such file or dire ctory ../platforms/win32/vm/sqWin32DirectInput.c:45: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:45: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c:46: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:46: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c: In function `InitDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:57: error: `DIPROPDWORD' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: (Each undeclared identifie r is reported only once ../platforms/win32/vm/sqWin32DirectInput.c:57: error: for each function it appea rs in.) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: parse error before "propWo rd" ../platforms/win32/vm/sqWin32DirectInput.c:64: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:64: error: `GUID_SysMouse' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:68: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:68: error: `c_dfDIMouse' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:72: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:74: error: `DISCL_NONEXCLUSIVE' undec lared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:75: error: `DISCL_BACKGROUND' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:79: error: `propWord' undeclared (fir st use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:80: error: `DIPROPHEADER' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:82: error: `DIPH_DEVICE' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:85: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:85: error: `DIPROP_BUFFERSIZE' undecl ared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:89: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `FreeDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:97: error: request for member `lpVtbl ' in something not a structure or union $ ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:102: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `DumpBufferedMouseTrail' : ../platforms/win32/vm/sqWin32DirectInput.c:110: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:110: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:117: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:119: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:123: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:125: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `GetBufferedMouseTrail':

../platforms/win32/vm/sqWin32DirectInput.c:144: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:144: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:166: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:168: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:172: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:174: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:195: error: `DIMOFS_X' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:196: error: `DIMOFS_Y' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:216: error: `DIMOFS_BUTTON0' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:217: error: `DIMOFS_BUTTON1' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:218: error: `DIMOFS_BUTTON2' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:219: error: `DIMOFS_BUTTON3' undeclar ed (first use in this function) make: *** [build/vm/sqWin32DirectInput.o] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 9:33 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------

Hi Rob,

your path is wrong. You should be picking up make and gcc 3.4.4 form your cygwin installation not from C:\GNUTools\bin\make.exe. Cog won't build with the old GNUTools. It needs cygwin with at least a gcc that supports sse2. 2.95 is alas too old.

So check that your commands are of the same or later version than

mcstalkerxp.cygwinbuild$ which make /usr/bin/make mcstalkerxp.cygwinbuild$ make -v GNU Make 3.81 Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This program built for i686-pc-cygwin mcstalkerxp.cygwinbuild$ which gcc /usr/bin/gcc mcstalkerxp.cygwinbuild$ gcc -v Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specs Configured with: /managed/gcc-build/final-v3-bootstrap/gcc-3.4.4-999/configure --verbose --program-suffix=-3 --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc--libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,d,f77,pascal,java,objc --enable-nls --without-included-gettext --enable-version-specific-runtime-libs --without-x --enable-libgcj --disable-java-awt --with-system-zlib --enable-interpreter --disable-libgcj-debug --enable-threads=posix --enable-java-gc=boehm --disable-win32-registry --enable-sjlj-exceptions --enable-hash-synchronization --enable-libstdcxx-debugThread model: posix gcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)

cheers Eliot

On Sat, Jun 26, 2010 at 6:14 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

I tried what you suggest: 1. check-out http://www.squeakvm.org/svn/squeak/branches/Cog 2. build with Cygwin bash

It took some digging, but I found my "C" drive in the dir structure of cygwin and found Cog. I cd into cygwinbuild and 'make'. I get the following error:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32ap i -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accum ulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll -loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../sr c/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third- party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE _SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM _NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c cc1.exe: Invalid option `sse2' cc1.exe: Invalid option `win32' cc1.exe: Invalid option `ms-bitfields' cc1.exe: Invalid option `no-accumulate-outgoing-args' cc1.exe: bad value (pentium4) for -march= switch ../src/vm/gcc3x-cointerp.c:1335: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1434: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1452: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1485: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c: In function `callbackEnter': ../src/vm/gcc3x-cointerp.c:10544: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c:10545: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c: In function `highBit': ../src/vm/gcc3x-cointerp.c:17423: warning: left shift count >= width of type ../src/vm/gcc3x-cointerp.c:17424: warning: right shift count >= width of type ../src/vm/gcc3x-cointerp.c: In function `primitiveClockLogAddresses': ../src/vm/gcc3x-cointerp.c:24296: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c:24297: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c: In function `readImageFromFileHeapSizeStartingAt': ../src/vm/gcc3x-cointerp.c:40746: warning: assignment makes integer from pointer without a cast C:\GNUTools\bin\make.exe: *** [build/vm/gcc3x-cointerp.o] Error 1

Thanks, Rob

PS. The US lost Good luck to England.

From: Eliot Miranda Sent: Saturday, June 26, 2010 8:30 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

Is it possible someone has generated another experimental VM for revision 16? I am hoping so. I have attempted to make with cygwin with poor results. Here is what I did:

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1) 2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz 3. Download VMMaker-oscog.16.mcz 4. Download Cog-eem.40.mcz 5. Read README and cygwinbuild\HowToBuild 6. Try to svn checkout code (platforms, src, cygwinbuild) - ERROR svn: OPTIONS of 'https://dev.qwaq.com/svn/XXX/trunk/platforms': Could not resolv e hostname `dev.qwaq.com': The requested name is valid, but no data of the reque sted type was found. (https://dev.qwaq.com) 7. Since platforms and src are already there, try make. Command prompt - cd into cygwinbuild and make. Error listed below. 8. Run VMMaker-Squeak4.1.image image in image and regenerate sources. Had to edit the directory separator from '/' to ''. Regenerated sources. 9. Run make again and unsurprisingly get the same error.

Cygwinbuild make ERROR - C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll ----------------------------------------------------- The syntax of the command is incorrect. make: [build/vm] Error 1 (ignored) mkdir ./build/vm The syntax of the command is incorrect. make: *** [build/vm] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Friday, June 25, 2010 1:13 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------

Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11. VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.com wrote:

Here is the crash dump from the Cog VM

-------------------------------------------------- From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

I am running the Cog image on the stock Squeak 4.1 vm. I was testing the Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Eliot,

Same issue. I have an eitheror.exe in my cygwinbuild directory. Here is the stdout output:

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make init Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: Nothing to be done for `init'.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make ./eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll ----------------------------------------------------- make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \ ../.././build/vm/ADPCMCodecPlugin.lib make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 8:57 AM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------------

Hi Rob,

eitheror.exe is made by the makefile. You could try any of

make eitheror.exe make ./eitheror.exe make init

or

rm -rf build make

HTH Eliot

On Sat, Jun 26, 2010 at 9:44 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

Cool. I got it and made more progress. Thanks! Here is the latest errors:

gcc -o build/vm/sqVirtualMachine.o -isystem/usr/include/mingw -I/usr/include/w32 api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-acc umulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funro ll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../ src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/thir d-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FI LE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -D VM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/Cross/vm/sqVirtualMachine.c

make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \ ../.././build/vm/ADPCMCodecPlugin.lib make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Cheers, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 12:29 AM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------------

On Sat, Jun 26, 2010 at 8:23 PM, Rob Withers reefedjib@yahoo.com wrote:

Eliot,

I am totally lost and quite annoyed at Microsoft at the moment.

I have dx7sdk, which I believe came from the WinTools (MingW) for building squeak on windows. This is "installed" on C:\dx7sdk. I do not believe there are any references to it in the environment variables. It is just 2 directories of files: include and lib. Somehow the MingW tools knew about it when building squeak on windows.

OK, but the Teleplace/Cog build on cygwin doesn't use c:\dx7sdk. It uses platforms/win32/third-party/dx9sdk. I've just added that to the Cog branch and if you update it should appear and the make should work. Here's the command that failed before:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c

Notice the -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include

It was my mistake that I omitted this from the tarball and the Cog branch. Apologies. But is is there now. So update (or if you haven't already check-out http://www.squeakvm.org/svn/squeak/branches/Cog) and you should make more progress.

HTH Eliot

Cygwin knows nothing about these files. Now that I am doing a 'make' with cygwin, I think I need to somehow tell it about the includes and the libs.

I tried updating Cog with 'svn' but it just grabbed the HowToBuild. No other changes. I am unclear what you mean: "Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build".

I thought to grab dx9sdk thinking is was already setup for this in Cog. I tried to find it, and even attempted to d/l a Delphi dx9sdk, which looked all wrong. I ended up going to the borg and d/led their zip. It was 225MB!!! It dropped like a big hairy turd on my hard drive and I unzipped it and ran setup, thinking that maybe that will setup some environment variables of interest.

Went back to a new cygwin bash shell and tried make. Same result.

What should I do?

Thanks, Rob

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:49 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------------

Hi Rob,

that'll teach me to check-in without doing a test build. Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build.

cheers Eliot

On Sat, Jun 26, 2010 at 7:20 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

I have this in C:\dx7sdk. Do I need to include its path or something in cygwin or the gcc call?

Thanks, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:18 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------

Hi Rob,

you need to install the dx7 sdk, e.g. from http://www.brothersoft.com/games/directx-7.html. Build instructions updated accordingly.

cheers Eliot

On Sat, Jun 26, 2010 at 7:02 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

A little progress, followed by another issue. I did have gnutools installed. Removed it and fixed the PATH. Tried make. Unknown. It turns out cygwin does NOT install make and gcc by default. Went through the setup and hand selected make and gcc to be installed.

Now I can make. It started churning files. I got this error:

gcc -o build/vm/sqWin32DirectInput.o -isystem/usr/include/mingw -I/usr/include/w 32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-a ccumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -fun roll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I. ./src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/th ird-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_ FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/win32/vm/sqWin32DirectInp ut.c ../platforms/win32/vm/sqWin32DirectInput.c:31:1: warning: "HMONITOR_DECLARED" re defined In file included from /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32 api/windows.h:48, from ../platforms/win32/vm/sqWin32DirectInput.c:27: /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32api/windef.h:283:1: wa rning: this is the location of the previous definition ../platforms/win32/vm/sqWin32DirectInput.c:35:20: dinput.h: No such file or dire ctory ../platforms/win32/vm/sqWin32DirectInput.c:45: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:45: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c:46: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:46: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c: In function `InitDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:57: error: `DIPROPDWORD' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: (Each undeclared identifie r is reported only once ../platforms/win32/vm/sqWin32DirectInput.c:57: error: for each function it appea rs in.) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: parse error before "propWo rd" ../platforms/win32/vm/sqWin32DirectInput.c:64: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:64: error: `GUID_SysMouse' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:68: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:68: error: `c_dfDIMouse' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:72: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:74: error: `DISCL_NONEXCLUSIVE' undec lared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:75: error: `DISCL_BACKGROUND' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:79: error: `propWord' undeclared (fir st use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:80: error: `DIPROPHEADER' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:82: error: `DIPH_DEVICE' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:85: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:85: error: `DIPROP_BUFFERSIZE' undecl ared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:89: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `FreeDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:97: error: request for member `lpVtbl ' in something not a structure or union $ ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:102: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `DumpBufferedMouseTrail' : ../platforms/win32/vm/sqWin32DirectInput.c:110: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:110: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:117: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:119: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:123: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:125: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `GetBufferedMouseTrail':

../platforms/win32/vm/sqWin32DirectInput.c:144: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:144: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:166: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:168: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:172: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:174: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:195: error: `DIMOFS_X' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:196: error: `DIMOFS_Y' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:216: error: `DIMOFS_BUTTON0' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:217: error: `DIMOFS_BUTTON1' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:218: error: `DIMOFS_BUTTON2' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:219: error: `DIMOFS_BUTTON3' undeclar ed (first use in this function) make: *** [build/vm/sqWin32DirectInput.o] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 9:33 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------

Hi Rob,

your path is wrong. You should be picking up make and gcc 3.4.4 form your cygwin installation not from C:\GNUTools\bin\make.exe. Cog won't build with the old GNUTools. It needs cygwin with at least a gcc that supports sse2. 2.95 is alas too old.

So check that your commands are of the same or later version than

mcstalkerxp.cygwinbuild$ which make /usr/bin/make mcstalkerxp.cygwinbuild$ make -v GNU Make 3.81 Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This program built for i686-pc-cygwin mcstalkerxp.cygwinbuild$ which gcc /usr/bin/gcc mcstalkerxp.cygwinbuild$ gcc -v Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specs Configured with: /managed/gcc-build/final-v3-bootstrap/gcc-3.4.4-999/configure --verbose --program-suffix=-3 --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc--libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,d,f77,pascal,java,objc --enable-nls --without-included-gettext --enable-version-specific-runtime-libs --without-x --enable-libgcj --disable-java-awt --with-system-zlib --enable-interpreter --disable-libgcj-debug --enable-threads=posix --enable-java-gc=boehm --disable-win32-registry --enable-sjlj-exceptions --enable-hash-synchronization --enable-libstdcxx-debugThread model: posix gcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)

cheers Eliot

On Sat, Jun 26, 2010 at 6:14 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

I tried what you suggest: 1. check-out http://www.squeakvm.org/svn/squeak/branches/Cog 2. build with Cygwin bash

It took some digging, but I found my "C" drive in the dir structure of cygwin and found Cog. I cd into cygwinbuild and 'make'. I get the following error:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32ap i -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accum ulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll -loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../sr c/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third- party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE _SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM _NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c cc1.exe: Invalid option `sse2' cc1.exe: Invalid option `win32' cc1.exe: Invalid option `ms-bitfields' cc1.exe: Invalid option `no-accumulate-outgoing-args' cc1.exe: bad value (pentium4) for -march= switch ../src/vm/gcc3x-cointerp.c:1335: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1434: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1452: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1485: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c: In function `callbackEnter': ../src/vm/gcc3x-cointerp.c:10544: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c:10545: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c: In function `highBit': ../src/vm/gcc3x-cointerp.c:17423: warning: left shift count >= width of type ../src/vm/gcc3x-cointerp.c:17424: warning: right shift count >= width of type ../src/vm/gcc3x-cointerp.c: In function `primitiveClockLogAddresses': ../src/vm/gcc3x-cointerp.c:24296: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c:24297: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c: In function `readImageFromFileHeapSizeStartingAt': ../src/vm/gcc3x-cointerp.c:40746: warning: assignment makes integer from pointer without a cast C:\GNUTools\bin\make.exe: *** [build/vm/gcc3x-cointerp.o] Error 1

Thanks, Rob

PS. The US lost Good luck to England.

From: Eliot Miranda Sent: Saturday, June 26, 2010 8:30 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

Is it possible someone has generated another experimental VM for revision 16? I am hoping so. I have attempted to make with cygwin with poor results. Here is what I did:

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1) 2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz 3. Download VMMaker-oscog.16.mcz 4. Download Cog-eem.40.mcz 5. Read README and cygwinbuild\HowToBuild 6. Try to svn checkout code (platforms, src, cygwinbuild) - ERROR svn: OPTIONS of 'https://dev.qwaq.com/svn/XXX/trunk/platforms': Could not resolv e hostname `dev.qwaq.com': The requested name is valid, but no data of the reque sted type was found. (https://dev.qwaq.com) 7. Since platforms and src are already there, try make. Command prompt - cd into cygwinbuild and make. Error listed below. 8. Run VMMaker-Squeak4.1.image image in image and regenerate sources. Had to edit the directory separator from '/' to ''. Regenerated sources. 9. Run make again and unsurprisingly get the same error.

Cygwinbuild make ERROR - C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll ----------------------------------------------------- The syntax of the command is incorrect. make: [build/vm] Error 1 (ignored) mkdir ./build/vm The syntax of the command is incorrect. make: *** [build/vm] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Friday, June 25, 2010 1:13 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------

Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11. VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.com wrote:

Here is the crash dump from the Cog VM

-------------------------------------------------- From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

I am running the Cog image on the stock Squeak 4.1 vm. I was testing the Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Yay! That was it! The make completed! I now have a working Cog.17.exe and I saved the supplied VMMaker-Squeak4.1.image as Cog.image. Thank you, Bob

The HowToBuild says:

4. At the end of this process you should have a brand new Croquet VM in the cygwinbuild/build/vm folder (make sure you transfer Squeak.map along with it)

Do I need the map file? What's it for?

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

-------------------------------------------------- From: "Bob Westergaard" bwestergaard@gmail.com Sent: Sunday, June 27, 2010 12:15 PM To: "Squeak Virtual Machine Development Discussion" vm-dev@lists.squeakfoundation.org Subject: Re: [Vm-dev] Squeak 4.1 VM crash

On Sun, Jun 27, 2010 at 6:43 AM, Rob Withers reefedjib@yahoo.com wrote:

...

... Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

...

make: eitheror.exe: Command not found

I had this problem when I was building the VM at work. The problem turned out to be that eitheror.exe (and those other utilities) where not in my search path.

To see if this is the case for you try something like:

$ PATH=$PATH:. make

If that works, then you need to add your current directory to your path.

-- Bob

OK, then (I presume) either add . to your path or change the makefile to specify ./eitheror.exe

On Sun, Jun 27, 2010 at 6:43 AM, Rob Withers reefedjib@yahoo.com wrote:

Eliot,

Same issue. I have an eitheror.exe in my cygwinbuild directory. Here is the stdout output:

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make init Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: Nothing to be done for `init'.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make ./eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll

---

make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

            LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \
            ../.././build/vm/ADPCMCodecPlugin.lib

make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Rob

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Sunday, June 27, 2010 8:57 AM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

eitheror.exe is made by the makefile.  You could try any of

make eitheror.exe make ./eitheror.exe make init

or

rm -rf build make

HTH Eliot

On Sat, Jun 26, 2010 at 9:44 PM, Rob Withers reefedjib@yahoo.com wrote:

...

Hey Eliot,

Cool. I got it and made more progress. Thanks! Here is the latest errors:

gcc -o build/vm/sqVirtualMachine.o -isystem/usr/include/mingw -I/usr/include/w32 api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-acc umulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funro ll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../ src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/thir d-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FI LE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -D VM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/Cross/vm/sqVirtualMachine.c

make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

            LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \
            ../.././build/vm/ADPCMCodecPlugin.lib

make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Cheers, Rob

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Sunday, June 27, 2010 12:29 AM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

On Sat, Jun 26, 2010 at 8:23 PM, Rob Withers reefedjib@yahoo.com wrote:

...

Eliot,

I am totally lost and quite annoyed at Microsoft at the moment.

I have dx7sdk, which I believe came from the WinTools (MingW) for building squeak on windows. This is "installed" on C:\dx7sdk. I do not believe there are any references to it in the environment variables. It is just 2 directories of files: include and lib. Somehow the MingW tools knew about it when building squeak on windows.

OK, but the Teleplace/Cog build on cygwin doesn't use c:\dx7sdk. It uses platforms/win32/third-party/dx9sdk. I've just added that to the Cog branch and if you update it should appear and the make should work. Here's the command that failed before:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c

Notice the -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include

It was my mistake that I omitted this from the tarball and the Cog branch. Apologies. But is is there now. So update (or if you haven't already check-out http://www.squeakvm.org/svn/squeak/branches/Cog) and you should make more progress.

HTH Eliot

...

Cygwin knows nothing about these files. Now that I am doing a 'make' with cygwin, I think I need to somehow tell it about the includes and the libs.

I tried updating Cog with 'svn' but it just grabbed the HowToBuild. No other changes. I am unclear what you mean: "Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build".

I thought to grab dx9sdk thinking is was already setup for this in Cog. I tried to find it, and even attempted to d/l a Delphi dx9sdk, which looked all wrong. I ended up going to the borg and d/led their zip. It was 225MB!!! It dropped like a big hairy turd on my hard drive and I unzipped it and ran setup, thinking that maybe that will setup some environment variables of interest.

Went back to a new cygwin bash shell and tried make. Same result.

What should I do?

Thanks, Rob

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Saturday, June 26, 2010 10:49 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

that'll teach me to check-in without doing a test build.  Turns out @

Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build.

cheers Eliot

On Sat, Jun 26, 2010 at 7:20 PM, Rob Withers reefedjib@yahoo.comwrote:

...

Hey Eliot,

I have this in C:\dx7sdk. Do I need to include its path or something in cygwin or the gcc call?

Thanks, Rob

---

The Modern Whig Party of Virginia - http://vawhigs.org

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Saturday, June 26, 2010 10:18 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

you need to install the dx7 sdk, e.g. from

http://www.brothersoft.com/games/directx-7.html. Build instructions updated accordingly.

cheers Eliot

On Sat, Jun 26, 2010 at 7:02 PM, Rob Withers reefedjib@yahoo.comwrote:

...

Hey Eliot,

A little progress, followed by another issue. I did have gnutools installed. Removed it and fixed the PATH. Tried make. Unknown. It turns out cygwin does NOT install make and gcc by default. Went through the setup and hand selected make and gcc to be installed.

Now I can make. It started churning files. I got this error:

gcc -o build/vm/sqWin32DirectInput.o -isystem/usr/include/mingw -I/usr/include/w 32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-a ccumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -fun roll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I. ./src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/th ird-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_ FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/win32/vm/sqWin32DirectInp ut.c ../platforms/win32/vm/sqWin32DirectInput.c:31:1: warning: "HMONITOR_DECLARED" re defined In file included from /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32 api/windows.h:48, from ../platforms/win32/vm/sqWin32DirectInput.c:27: /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32api/windef.h:283:1: wa rning: this is the location of the previous definition ../platforms/win32/vm/sqWin32DirectInput.c:35:20: dinput.h: No such file or dire ctory ../platforms/win32/vm/sqWin32DirectInput.c:45: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:45: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c:46: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:46: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c: In function `InitDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:57: error: `DIPROPDWORD' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: (Each undeclared identifie r is reported only once ../platforms/win32/vm/sqWin32DirectInput.c:57: error: for each function it appea rs in.) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: parse error before "propWo rd" ../platforms/win32/vm/sqWin32DirectInput.c:64: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:64: error: `GUID_SysMouse' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:68: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:68: error: `c_dfDIMouse' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:72: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:74: error: `DISCL_NONEXCLUSIVE' undec lared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:75: error: `DISCL_BACKGROUND' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:79: error: `propWord' undeclared (fir st use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:80: error: `DIPROPHEADER' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:82: error: `DIPH_DEVICE' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:85: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:85: error: `DIPROP_BUFFERSIZE' undecl ared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:89: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `FreeDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:97: error: request for member `lpVtbl ' in something not a structure or union $ ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:102: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `DumpBufferedMouseTrail' : ../platforms/win32/vm/sqWin32DirectInput.c:110: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:110: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:117: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:119: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:123: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:125: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `GetBufferedMouseTrail':

../platforms/win32/vm/sqWin32DirectInput.c:144: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:144: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:166: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:168: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:172: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:174: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:195: error: `DIMOFS_X' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:196: error: `DIMOFS_Y' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:216: error: `DIMOFS_BUTTON0' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:217: error: `DIMOFS_BUTTON1' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:218: error: `DIMOFS_BUTTON2' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:219: error: `DIMOFS_BUTTON3' undeclar ed (first use in this function) make: *** [build/vm/sqWin32DirectInput.o] Error 1

Cheers, Rob

---

The Modern Whig Party of Virginia - http://vawhigs.org

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Saturday, June 26, 2010 9:33 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

your path is wrong.  You should be picking up make and gcc 3.4.4

form your cygwin installation not from C:\GNUTools\bin\make.exe. Cog won't build with the old GNUTools. It needs cygwin with at least a gcc that supports sse2. 2.95 is alas too old.

So check that your commands are of the same or later version than

mcstalkerxp.cygwinbuild$ which make */usr/bin/make* mcstalkerxp.cygwinbuild$ make -v *GNU Make 3.81* Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This program built for i686-pc-cygwin mcstalkerxp.cygwinbuild$ which gcc */usr/bin/gcc* mcstalkerxp.cygwinbuild$ gcc -v Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specs Configured with: /managed/gcc-build/final-v3-bootstrap/gcc-3.4.4-999/configure --verbose --program-suffix=-3 --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc--libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,d,f77,pascal,java,objc --enable-nls --without-included-gettext --enable-version-specific-runtime-libs --without-x --enable-libgcj --disable-java-awt --with-system-zlib --enable-interpreter --disable-libgcj-debug --enable-threads=posix --enable-java-gc=boehm --disable-win32-registry --enable-sjlj-exceptions --enable-hash-synchronization --enable-libstdcxx-debugThread model: posix *gcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)*

cheers Eliot

On Sat, Jun 26, 2010 at 6:14 PM, Rob Withers reefedjib@yahoo.comwrote:

...

Hi Eliot,

I tried what you suggest:

1. check-out http://www.squeakvm.org/svn/squeak/branches/Cog
2. build with Cygwin bash

It took some digging, but I found my "C" drive in the dir structure of cygwin and found Cog. I cd into cygwinbuild and 'make'. I get the following error:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32ap i -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accum ulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll -loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../sr c/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third- party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE _SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM _NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c cc1.exe: Invalid option `sse2' cc1.exe: Invalid option `win32' cc1.exe: Invalid option `ms-bitfields' cc1.exe: Invalid option `no-accumulate-outgoing-args' cc1.exe: bad value (pentium4) for -march= switch ../src/vm/gcc3x-cointerp.c:1335: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1434: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1452: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1485: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c: In function `callbackEnter': ../src/vm/gcc3x-cointerp.c:10544: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c:10545: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c: In function `highBit': ../src/vm/gcc3x-cointerp.c:17423: warning: left shift count >= width of type ../src/vm/gcc3x-cointerp.c:17424: warning: right shift count >= width of type ../src/vm/gcc3x-cointerp.c: In function `primitiveClockLogAddresses': ../src/vm/gcc3x-cointerp.c:24296: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c:24297: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c: In function `readImageFromFileHeapSizeStartingAt': ../src/vm/gcc3x-cointerp.c:40746: warning: assignment makes integer from pointer without a cast C:\GNUTools\bin\make.exe: *** [build/vm/gcc3x-cointerp.o] Error 1

Thanks, Rob

PS. The US lost [image: Sad smile emoticon] Good luck to England.

*From:* Eliot Miranda eliot.miranda@gmail.com *Sent:* Saturday, June 26, 2010 8:30 PM *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash

---

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.comwrote:

> > Hi Eliot, > > Is it possible someone has generated another experimental VM for > revision 16? I am hoping so. I have attempted to make with cygwin with > poor results. Here is what I did: > >

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1)

> 2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz > 3. Download VMMaker-oscog.16.mcz > 4. Download Cog-eem.40.mcz > 5. Read README and cygwinbuild\HowToBuild > 6. Try to svn checkout code (platforms, src, cygwinbuild) > - ERROR svn: OPTIONS of ' > https://dev.qwaq.com/svn/XXX/trunk/platforms': Could not resolv > e hostname `dev.qwaq.com': The requested name is valid, but no data > of the reque > sted type was found. > (https://dev.qwaq.com) > 7. Since platforms and src are already there, try make. Command > prompt - cd into cygwinbuild and make. Error listed below. > 8. Run VMMaker-Squeak4.1.image image in image and regenerate > sources. Had to edit the directory separator from '/' to ''. Regenerated > sources. > 9. Run make again and unsurprisingly get the same error. > > Cygwinbuild make ERROR - > C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make > Makefile:281: warning: overriding commands for target `Croquet.res' > Makefile:263: warning: ignoring old commands for target `Croquet.res' > ---------------- Makefile settings ------------------ > VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm > INCLUDES=-I. -I../src/vm -I../platforms/win32/vm > -I../platforms/Cross/vm -I../pl > atforms/win32/third-party/dx9sdk/Include > CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 > -mwindows > -mno-cygwin -mwin32 -mno-rtd -mms-bitfields > -mno-accumulate-outgoing-args -D_MT > -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops > -fno-builtin-printf > -fno-builtin-putchar -fno-builtin-fprintf > INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin > B3DAcceleratorPlugin B2DPlugi > n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin > DSAPrims F > FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin > IA32ABI Jo > ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt > LargeIntegers Lo > calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin > RePlugin S > ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims > SoundGenerationPlugin St > arSqueakPlugin SurfacePlugin UUIDPlugin > EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin > LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib > ./build/vm/ > B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib > ./build/vm/BitBltPlugin.lib ./ > build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib > ./build/vm/ZipPlug > in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib > ./build/vm/FFTPlugin.li > b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib > ./build/vm/FloatMath > Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib > ./build/vm/Joy > stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib > ./build/vm/JPEGReadWriter2 > Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib > ./build/vm/LocalePl > ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib > ./build/vm/Mis > cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib > ./build/vm/RePlugin.lib ./build/ > vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib > ./build/vm/SocketPlugin.lib ./ > build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib > ./build/vm/Sta > rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib > ./build/vm/UUIDPlugin.lib > DLLS=./build/vm/SqueakFFIPrims.dll > ./build/vm/Win32OSProcessPlugin.dll > ----------------------------------------------------- > The syntax of the command is incorrect. > make: [build/vm] Error 1 (ignored) > mkdir ./build/vm > The syntax of the command is incorrect. > make: *** [build/vm] Error 1 > > > Cheers, > Rob > > ---- > The Modern Whig Party of Virginia - http://vawhigs.org > > > > *From:* Eliot Miranda eliot.miranda@gmail.com > *Sent:* Friday, June 25, 2010 1:13 PM > *To:* Squeak Virtual Machine Development Discussionvm-dev@lists.squeakfoundation.org > *Subject:* Re: [Vm-dev] Squeak 4.1 VM crash > > ------------------------------ > > Hi Rob, > > you're running a Cog VM derived from VMMaker-oscog.11. > VMMaker-oscog.16 has some important fixes. You might want to update. > > best > Eliot > > On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.comwrote: > >> >> Here is the crash dump from the Cog VM >> >> -------------------------------------------------- >> From: "Rob Withers" reefedjib@yahoo.com >> Sent: Friday, June 25, 2010 7:20 AM >> To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org >> Subject: [Vm-dev] Squeak 4.1 VM crash >> >> >>> >> >> >> I am running the Cog image on the stock Squeak 4.1 vm. I was >>> testing the >>> Cryptography package. There are two test cases that are now >>> failing: >>> CryptoRigndaelCBCTest>>#testByteArrayFromHexString and >>> CryptoX509Test>>#testSignatureValidation for unknown reasons. >>> >>> I decided to Run Coverage. I am not really sure what this does, >>> but I was >>> trying to find a way to get performance numbers and then compare to >>> the Cog >>> VM. >>> >>> I got the attached crash dump. >>> >>> Rob >>> >>> >>> >> > >

Thanks again, Eliot.

The whole point of this was to test the crash scenario I have been able to reproduce in Squeak v4.1 and Cog.v17. It is still happening. It is specifically when running test coverage in the TestRunner tool. It is not just Crypto, it is happening with VMMaker-Tests as well. Here is the last crash.dmp I got from Cog.

Regards, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 1:15 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------------

OK, then (I presume) either add . to your path or change the makefile to specify ./eitheror.exe

On Sun, Jun 27, 2010 at 6:43 AM, Rob Withers reefedjib@yahoo.com wrote:

Eliot,

Same issue. I have an eitheror.exe in my cygwinbuild directory. Here is the stdout output:

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make init Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: Nothing to be done for `init'.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make ./eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll ----------------------------------------------------- make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \ ../.././build/vm/ADPCMCodecPlugin.lib make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 8:57 AM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------------

Hi Rob,

eitheror.exe is made by the makefile. You could try any of

make eitheror.exe make ./eitheror.exe make init

or

rm -rf build make

HTH Eliot

On Sat, Jun 26, 2010 at 9:44 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

Cool. I got it and made more progress. Thanks! Here is the latest errors:

gcc -o build/vm/sqVirtualMachine.o -isystem/usr/include/mingw -I/usr/include/w32 api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-acc umulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funro ll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../ src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/thir d-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FI LE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -D VM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/Cross/vm/sqVirtualMachine.c

make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \ ../.././build/vm/ADPCMCodecPlugin.lib make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Cheers, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 12:29 AM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------------

On Sat, Jun 26, 2010 at 8:23 PM, Rob Withers reefedjib@yahoo.com wrote:

Eliot,

I am totally lost and quite annoyed at Microsoft at the moment.

I have dx7sdk, which I believe came from the WinTools (MingW) for building squeak on windows. This is "installed" on C:\dx7sdk. I do not believe there are any references to it in the environment variables. It is just 2 directories of files: include and lib. Somehow the MingW tools knew about it when building squeak on windows.

OK, but the Teleplace/Cog build on cygwin doesn't use c:\dx7sdk. It uses platforms/win32/third-party/dx9sdk. I've just added that to the Cog branch and if you update it should appear and the make should work. Here's the command that failed before:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c

Notice the -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include

It was my mistake that I omitted this from the tarball and the Cog branch. Apologies. But is is there now. So update (or if you haven't already check-out http://www.squeakvm.org/svn/squeak/branches/Cog) and you should make more progress.

HTH Eliot

Cygwin knows nothing about these files. Now that I am doing a 'make' with cygwin, I think I need to somehow tell it about the includes and the libs.

I tried updating Cog with 'svn' but it just grabbed the HowToBuild. No other changes. I am unclear what you mean: "Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build".

I thought to grab dx9sdk thinking is was already setup for this in Cog. I tried to find it, and even attempted to d/l a Delphi dx9sdk, which looked all wrong. I ended up going to the borg and d/led their zip. It was 225MB!!! It dropped like a big hairy turd on my hard drive and I unzipped it and ran setup, thinking that maybe that will setup some environment variables of interest.

Went back to a new cygwin bash shell and tried make. Same result.

What should I do?

Thanks, Rob

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:49 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------

Hi Rob,

that'll teach me to check-in without doing a test build. Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build.

cheers Eliot

On Sat, Jun 26, 2010 at 7:20 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

I have this in C:\dx7sdk. Do I need to include its path or something in cygwin or the gcc call?

Thanks, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:18 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------

Hi Rob,

you need to install the dx7 sdk, e.g. from http://www.brothersoft.com/games/directx-7.html. Build instructions updated accordingly.

cheers Eliot

On Sat, Jun 26, 2010 at 7:02 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

A little progress, followed by another issue. I did have gnutools installed. Removed it and fixed the PATH. Tried make. Unknown. It turns out cygwin does NOT install make and gcc by default. Went through the setup and hand selected make and gcc to be installed.

Now I can make. It started churning files. I got this error:

gcc -o build/vm/sqWin32DirectInput.o -isystem/usr/include/mingw -I/usr/include/w 32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-a ccumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -fun roll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I. ./src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/th ird-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_ FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/win32/vm/sqWin32DirectInp ut.c ../platforms/win32/vm/sqWin32DirectInput.c:31:1: warning: "HMONITOR_DECLARED" re defined In file included from /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32 api/windows.h:48, from ../platforms/win32/vm/sqWin32DirectInput.c:27: /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32api/windef.h:283:1: wa rning: this is the location of the previous definition ../platforms/win32/vm/sqWin32DirectInput.c:35:20: dinput.h: No such file or dire ctory ../platforms/win32/vm/sqWin32DirectInput.c:45: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:45: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c:46: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:46: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c: In function `InitDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:57: error: `DIPROPDWORD' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: (Each undeclared identifie r is reported only once ../platforms/win32/vm/sqWin32DirectInput.c:57: error: for each function it appea rs in.) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: parse error before "propWo rd" ../platforms/win32/vm/sqWin32DirectInput.c:64: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:64: error: `GUID_SysMouse' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:68: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:68: error: `c_dfDIMouse' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:72: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:74: error: `DISCL_NONEXCLUSIVE' undec lared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:75: error: `DISCL_BACKGROUND' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:79: error: `propWord' undeclared (fir st use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:80: error: `DIPROPHEADER' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:82: error: `DIPH_DEVICE' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:85: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:85: error: `DIPROP_BUFFERSIZE' undecl ared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:89: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `FreeDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:97: error: request for member `lpVtbl ' in something not a structure or union $ ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:102: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `DumpBufferedMouseTrail' : ../platforms/win32/vm/sqWin32DirectInput.c:110: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:110: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:117: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:119: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:123: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:125: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `GetBufferedMouseTrail':

../platforms/win32/vm/sqWin32DirectInput.c:144: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:144: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:166: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:168: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:172: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:174: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:195: error: `DIMOFS_X' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:196: error: `DIMOFS_Y' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:216: error: `DIMOFS_BUTTON0' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:217: error: `DIMOFS_BUTTON1' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:218: error: `DIMOFS_BUTTON2' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:219: error: `DIMOFS_BUTTON3' undeclar ed (first use in this function) make: *** [build/vm/sqWin32DirectInput.o] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 9:33 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------

Hi Rob,

your path is wrong. You should be picking up make and gcc 3.4.4 form your cygwin installation not from C:\GNUTools\bin\make.exe. Cog won't build with the old GNUTools. It needs cygwin with at least a gcc that supports sse2. 2.95 is alas too old.

So check that your commands are of the same or later version than

mcstalkerxp.cygwinbuild$ which make /usr/bin/make mcstalkerxp.cygwinbuild$ make -v GNU Make 3.81 Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This program built for i686-pc-cygwin mcstalkerxp.cygwinbuild$ which gcc /usr/bin/gcc mcstalkerxp.cygwinbuild$ gcc -v Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specs Configured with: /managed/gcc-build/final-v3-bootstrap/gcc-3.4.4-999/configure --verbose --program-suffix=-3 --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc--libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,d,f77,pascal,java,objc --enable-nls --without-included-gettext --enable-version-specific-runtime-libs --without-x --enable-libgcj --disable-java-awt --with-system-zlib --enable-interpreter --disable-libgcj-debug --enable-threads=posix --enable-java-gc=boehm --disable-win32-registry --enable-sjlj-exceptions --enable-hash-synchronization --enable-libstdcxx-debugThread model: posix gcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)

cheers Eliot

On Sat, Jun 26, 2010 at 6:14 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

I tried what you suggest: 1. check-out http://www.squeakvm.org/svn/squeak/branches/Cog 2. build with Cygwin bash

It took some digging, but I found my "C" drive in the dir structure of cygwin and found Cog. I cd into cygwinbuild and 'make'. I get the following error:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32ap i -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accum ulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll -loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../sr c/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third- party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE _SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM _NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c cc1.exe: Invalid option `sse2' cc1.exe: Invalid option `win32' cc1.exe: Invalid option `ms-bitfields' cc1.exe: Invalid option `no-accumulate-outgoing-args' cc1.exe: bad value (pentium4) for -march= switch ../src/vm/gcc3x-cointerp.c:1335: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1434: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1452: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1485: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c: In function `callbackEnter': ../src/vm/gcc3x-cointerp.c:10544: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c:10545: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c: In function `highBit': ../src/vm/gcc3x-cointerp.c:17423: warning: left shift count >= width of type ../src/vm/gcc3x-cointerp.c:17424: warning: right shift count >= width of type ../src/vm/gcc3x-cointerp.c: In function `primitiveClockLogAddresses': ../src/vm/gcc3x-cointerp.c:24296: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c:24297: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c: In function `readImageFromFileHeapSizeStartingAt': ../src/vm/gcc3x-cointerp.c:40746: warning: assignment makes integer from pointer without a cast C:\GNUTools\bin\make.exe: *** [build/vm/gcc3x-cointerp.o] Error 1

Thanks, Rob

PS. The US lost Good luck to England.

From: Eliot Miranda Sent: Saturday, June 26, 2010 8:30 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

Is it possible someone has generated another experimental VM for revision 16? I am hoping so. I have attempted to make with cygwin with poor results. Here is what I did:

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1) 2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz 3. Download VMMaker-oscog.16.mcz 4. Download Cog-eem.40.mcz 5. Read README and cygwinbuild\HowToBuild 6. Try to svn checkout code (platforms, src, cygwinbuild) - ERROR svn: OPTIONS of 'https://dev.qwaq.com/svn/XXX/trunk/platforms': Could not resolv e hostname `dev.qwaq.com': The requested name is valid, but no data of the reque sted type was found. (https://dev.qwaq.com) 7. Since platforms and src are already there, try make. Command prompt - cd into cygwinbuild and make. Error listed below. 8. Run VMMaker-Squeak4.1.image image in image and regenerate sources. Had to edit the directory separator from '/' to ''. Regenerated sources. 9. Run make again and unsurprisingly get the same error.

Cygwinbuild make ERROR - C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll ----------------------------------------------------- The syntax of the command is incorrect. make: [build/vm] Error 1 (ignored) mkdir ./build/vm The syntax of the command is incorrect. make: *** [build/vm] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Friday, June 25, 2010 1:13 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------

Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11. VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.com wrote:

Here is the crash dump from the Cog VM

-------------------------------------------------- From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

I am running the Cog image on the stock Squeak 4.1 vm. I was testing the Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Hi Eliot,

Squeak V4.1: This is happening in base Squeak V4.1, that I downloaded from squeak.org, I believe. It is using the stock Squeak4.1.image with Cryptography-cmm.13.mcz loaded from http://www.squeaksource.com/Cryptography repository. 1.. Select a test case from Cryptography-Tests 2.. Click 'run coverage' 3.. select Cryptography package 4.. BOOM! Cog VM: I build the Cog Vm today from VMMaker-oscog.17.mcz. This is from your tarball plus I did a svn check-out. It is with Cryptography-cmm.13.mcz loaded from http://www.squeaksource.com/Cryptography repository.

1.. Select a test case from Cryptography-Tests 2.. Click 'run coverage' 3.. select Cryptography package 4.. BOOM! AND

1.. Select StackInterpreterTests from VMMaker-Tests 2.. Click 'run coverage' 3.. select VMMaker package 4.. BOOM! AND

1.. Select UPackageTestCase from Universes-Tests 2.. Click 'run coverage' 3.. select Universes package 4.. BOOM! I hope this helps, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 7:44 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------------

Hi Rob,

is this in base 4.1 with Cog patches or in an updated image or what exactly? Also what's the minimum set of tests I need to select to see the crash?

TIA Eliot

On Sun, Jun 27, 2010 at 12:36 PM, Rob Withers reefedjib@yahoo.com wrote:

Thanks again, Eliot.

The whole point of this was to test the crash scenario I have been able to reproduce in Squeak v4.1 and Cog.v17. It is still happening. It is specifically when running test coverage in the TestRunner tool. It is not just Crypto, it is happening with VMMaker-Tests as well. Here is the last crash.dmp I got from Cog.

Regards, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 1:15 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------------

OK, then (I presume) either add . to your path or change the makefile to specify ./eitheror.exe

On Sun, Jun 27, 2010 at 6:43 AM, Rob Withers reefedjib@yahoo.com wrote:

Eliot,

Same issue. I have an eitheror.exe in my cygwinbuild directory. Here is the stdout output:

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make init Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: Nothing to be done for `init'.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make ./eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll ----------------------------------------------------- make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \ ../.././build/vm/ADPCMCodecPlugin.lib make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 8:57 AM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------------

Hi Rob,

eitheror.exe is made by the makefile. You could try any of

make eitheror.exe make ./eitheror.exe make init

or

rm -rf build make

HTH Eliot

On Sat, Jun 26, 2010 at 9:44 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

Cool. I got it and made more progress. Thanks! Here is the latest errors:

gcc -o build/vm/sqVirtualMachine.o -isystem/usr/include/mingw -I/usr/include/w32 api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-acc umulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funro ll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../ src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/thir d-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FI LE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -D VM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/Cross/vm/sqVirtualMachine.c

make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \ ../.././build/vm/ADPCMCodecPlugin.lib make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Cheers, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 12:29 AM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------

On Sat, Jun 26, 2010 at 8:23 PM, Rob Withers reefedjib@yahoo.com wrote:

Eliot,

I am totally lost and quite annoyed at Microsoft at the moment.

I have dx7sdk, which I believe came from the WinTools (MingW) for building squeak on windows. This is "installed" on C:\dx7sdk. I do not believe there are any references to it in the environment variables. It is just 2 directories of files: include and lib. Somehow the MingW tools knew about it when building squeak on windows.

OK, but the Teleplace/Cog build on cygwin doesn't use c:\dx7sdk. It uses platforms/win32/third-party/dx9sdk. I've just added that to the Cog branch and if you update it should appear and the make should work. Here's the command that failed before:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c

Notice the -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include

It was my mistake that I omitted this from the tarball and the Cog branch. Apologies. But is is there now. So update (or if you haven't already check-out http://www.squeakvm.org/svn/squeak/branches/Cog) and you should make more progress.

HTH Eliot

Cygwin knows nothing about these files. Now that I am doing a 'make' with cygwin, I think I need to somehow tell it about the includes and the libs.

I tried updating Cog with 'svn' but it just grabbed the HowToBuild. No other changes. I am unclear what you mean: "Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build".

I thought to grab dx9sdk thinking is was already setup for this in Cog. I tried to find it, and even attempted to d/l a Delphi dx9sdk, which looked all wrong. I ended up going to the borg and d/led their zip. It was 225MB!!! It dropped like a big hairy turd on my hard drive and I unzipped it and ran setup, thinking that maybe that will setup some environment variables of interest.

Went back to a new cygwin bash shell and tried make. Same result.

What should I do?

Thanks, Rob

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:49 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------

Hi Rob,

that'll teach me to check-in without doing a test build. Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build.

cheers Eliot

On Sat, Jun 26, 2010 at 7:20 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

I have this in C:\dx7sdk. Do I need to include its path or something in cygwin or the gcc call?

Thanks, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:18 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------

Hi Rob,

you need to install the dx7 sdk, e.g. from http://www.brothersoft.com/games/directx-7.html. Build instructions updated accordingly.

cheers Eliot

On Sat, Jun 26, 2010 at 7:02 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

A little progress, followed by another issue. I did have gnutools installed. Removed it and fixed the PATH. Tried make. Unknown. It turns out cygwin does NOT install make and gcc by default. Went through the setup and hand selected make and gcc to be installed.

Now I can make. It started churning files. I got this error:

gcc -o build/vm/sqWin32DirectInput.o -isystem/usr/include/mingw -I/usr/include/w 32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-a ccumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -fun roll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I. ./src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/th ird-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_ FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/win32/vm/sqWin32DirectInp ut.c ../platforms/win32/vm/sqWin32DirectInput.c:31:1: warning: "HMONITOR_DECLARED" re defined In file included from /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32 api/windows.h:48, from ../platforms/win32/vm/sqWin32DirectInput.c:27: /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32api/windef.h:283:1: wa rning: this is the location of the previous definition ../platforms/win32/vm/sqWin32DirectInput.c:35:20: dinput.h: No such file or dire ctory ../platforms/win32/vm/sqWin32DirectInput.c:45: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:45: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c:46: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:46: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c: In function `InitDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:57: error: `DIPROPDWORD' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: (Each undeclared identifie r is reported only once ../platforms/win32/vm/sqWin32DirectInput.c:57: error: for each function it appea rs in.) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: parse error before "propWo rd" ../platforms/win32/vm/sqWin32DirectInput.c:64: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:64: error: `GUID_SysMouse' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:68: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:68: error: `c_dfDIMouse' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:72: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:74: error: `DISCL_NONEXCLUSIVE' undec lared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:75: error: `DISCL_BACKGROUND' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:79: error: `propWord' undeclared (fir st use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:80: error: `DIPROPHEADER' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:82: error: `DIPH_DEVICE' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:85: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:85: error: `DIPROP_BUFFERSIZE' undecl ared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:89: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `FreeDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:97: error: request for member `lpVtbl ' in something not a structure or union $ ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:102: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `DumpBufferedMouseTrail' : ../platforms/win32/vm/sqWin32DirectInput.c:110: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:110: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:117: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:119: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:123: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:125: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `GetBufferedMouseTrail':

../platforms/win32/vm/sqWin32DirectInput.c:144: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:144: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:166: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:168: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:172: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:174: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:195: error: `DIMOFS_X' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:196: error: `DIMOFS_Y' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:216: error: `DIMOFS_BUTTON0' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:217: error: `DIMOFS_BUTTON1' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:218: error: `DIMOFS_BUTTON2' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:219: error: `DIMOFS_BUTTON3' undeclar ed (first use in this function) make: *** [build/vm/sqWin32DirectInput.o] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 9:33 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------

Hi Rob,

your path is wrong. You should be picking up make and gcc 3.4.4 form your cygwin installation not from C:\GNUTools\bin\make.exe. Cog won't build with the old GNUTools. It needs cygwin with at least a gcc that supports sse2. 2.95 is alas too old.

So check that your commands are of the same or later version than

mcstalkerxp.cygwinbuild$ which make /usr/bin/make mcstalkerxp.cygwinbuild$ make -v GNU Make 3.81 Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This program built for i686-pc-cygwin mcstalkerxp.cygwinbuild$ which gcc /usr/bin/gcc mcstalkerxp.cygwinbuild$ gcc -v Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specs Configured with: /managed/gcc-build/final-v3-bootstrap/gcc-3.4.4-999/configure --verbose --program-suffix=-3 --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc--libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,d,f77,pascal,java,objc --enable-nls --without-included-gettext --enable-version-specific-runtime-libs --without-x --enable-libgcj --disable-java-awt --with-system-zlib --enable-interpreter --disable-libgcj-debug --enable-threads=posix --enable-java-gc=boehm --disable-win32-registry --enable-sjlj-exceptions --enable-hash-synchronization --enable-libstdcxx-debugThread model: posix gcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)

cheers Eliot

On Sat, Jun 26, 2010 at 6:14 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

I tried what you suggest: 1. check-out http://www.squeakvm.org/svn/squeak/branches/Cog 2. build with Cygwin bash

It took some digging, but I found my "C" drive in the dir structure of cygwin and found Cog. I cd into cygwinbuild and 'make'. I get the following error:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32ap i -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accum ulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll -loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../sr c/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third- party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE _SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM _NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c cc1.exe: Invalid option `sse2' cc1.exe: Invalid option `win32' cc1.exe: Invalid option `ms-bitfields' cc1.exe: Invalid option `no-accumulate-outgoing-args' cc1.exe: bad value (pentium4) for -march= switch ../src/vm/gcc3x-cointerp.c:1335: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1434: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1452: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1485: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c: In function `callbackEnter': ../src/vm/gcc3x-cointerp.c:10544: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c:10545: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c: In function `highBit': ../src/vm/gcc3x-cointerp.c:17423: warning: left shift count >= width of type ../src/vm/gcc3x-cointerp.c:17424: warning: right shift count >= width of type ../src/vm/gcc3x-cointerp.c: In function `primitiveClockLogAddresses': ../src/vm/gcc3x-cointerp.c:24296: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c:24297: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c: In function `readImageFromFileHeapSizeStartingAt': ../src/vm/gcc3x-cointerp.c:40746: warning: assignment makes integer from pointer without a cast C:\GNUTools\bin\make.exe: *** [build/vm/gcc3x-cointerp.o] Error 1

Thanks, Rob

PS. The US lost Good luck to England.

From: Eliot Miranda Sent: Saturday, June 26, 2010 8:30 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

Is it possible someone has generated another experimental VM for revision 16? I am hoping so. I have attempted to make with cygwin with poor results. Here is what I did:

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1) 2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz 3. Download VMMaker-oscog.16.mcz 4. Download Cog-eem.40.mcz 5. Read README and cygwinbuild\HowToBuild 6. Try to svn checkout code (platforms, src, cygwinbuild) - ERROR svn: OPTIONS of 'https://dev.qwaq.com/svn/XXX/trunk/platforms': Could not resolv e hostname `dev.qwaq.com': The requested name is valid, but no data of the reque sted type was found. (https://dev.qwaq.com) 7. Since platforms and src are already there, try make. Command prompt - cd into cygwinbuild and make. Error listed below. 8. Run VMMaker-Squeak4.1.image image in image and regenerate sources. Had to edit the directory separator from '/' to ''. Regenerated sources. 9. Run make again and unsurprisingly get the same error.

Cygwinbuild make ERROR - C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll ----------------------------------------------------- The syntax of the command is incorrect. make: [build/vm] Error 1 (ignored) mkdir ./build/vm The syntax of the command is incorrect. make: *** [build/vm] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Friday, June 25, 2010 1:13 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------

Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11. VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.com wrote:

Here is the crash dump from the Cog VM

-------------------------------------------------- From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

I am running the Cog image on the stock Squeak 4.1 vm. I was testing the Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Eliot,

Sorry, I mixed the Squeak VM case with the Cog VM case and left out the image I used for the Cog VM. This is happening in both. Ignoring the Squeak VM...

Cog VM: I build the Cog Vm today from VMMaker-oscog.17.mcz. This is from your tarball plus I did a svn check-out. I used your image from the image directory from the tarball. I ran it in Cog VM and saved it. I loaded Cryptography-cmm.13.mcz loaded from http://www.squeaksource.com/Cryptography repository and saved it. Then I ran tests. (I believe your image came with NecessaryImageChangesForCogToWork.1.cs already loaded)

1.. Select a test case from Cryptography-Tests 2.. Click 'run coverage' 3.. select Cryptography package 4.. BOOM! AND

1.. Select StackInterpreterTests from VMMaker-Tests 2.. Click 'run coverage' 3.. select VMMaker package 4.. BOOM! AND

1.. Select UPackageTestCase from Universes-Tests 2.. Click 'run coverage' 3.. select Universes package 4.. BOOM! HTH, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 8:20 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------------

On Sun, Jun 27, 2010 at 5:07 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

Squeak V4.1: This is happening in base Squeak V4.1, that I downloaded from squeak.org, I believe.

OK, you at least need to file-in NecessaryImageChangesForCogToWork.1.cs, i.e. http://www.squeakvm.org/svn/squeak/branches/Cog/image/NecessaryImageChangesF...

cheers, Eliot

It is using the stock Squeak4.1.image with Cryptography-cmm.13.mcz loaded from http://www.squeaksource.com/Cryptography repository. 1.. Select a test case from Cryptography-Tests 2.. Click 'run coverage' 3.. select Cryptography package 4.. BOOM! Cog VM: I build the Cog Vm today from VMMaker-oscog.17.mcz. This is from your tarball plus I did a svn check-out. It is with Cryptography-cmm.13.mcz loaded from http://www.squeaksource.com/Cryptography repository.

1.. Select a test case from Cryptography-Tests 2.. Click 'run coverage' 3.. select Cryptography package 4.. BOOM! AND

1.. Select StackInterpreterTests from VMMaker-Tests 2.. Click 'run coverage' 3.. select VMMaker package 4.. BOOM! AND

1.. Select UPackageTestCase from Universes-Tests 2.. Click 'run coverage' 3.. select Universes package 4.. BOOM! I hope this helps, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 7:44 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------------

Hi Rob,

is this in base 4.1 with Cog patches or in an updated image or what exactly? Also what's the minimum set of tests I need to select to see the crash?

TIA Eliot

On Sun, Jun 27, 2010 at 12:36 PM, Rob Withers reefedjib@yahoo.com wrote:

Thanks again, Eliot.

The whole point of this was to test the crash scenario I have been able to reproduce in Squeak v4.1 and Cog.v17. It is still happening. It is specifically when running test coverage in the TestRunner tool. It is not just Crypto, it is happening with VMMaker-Tests as well. Here is the last crash.dmp I got from Cog.

Regards, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 1:15 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------------

OK, then (I presume) either add . to your path or change the makefile to specify ./eitheror.exe

On Sun, Jun 27, 2010 at 6:43 AM, Rob Withers reefedjib@yahoo.com wrote:

Eliot,

Same issue. I have an eitheror.exe in my cygwinbuild directory. Here is the stdout output:

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make init Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: Nothing to be done for `init'.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make ./eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make eitheror.exe Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' make: `eitheror.exe' is up to date.

Robert@Quotar /cygdrive/c/Cog/cygwinbuild $ make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll ----------------------------------------------------- make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \ ../.././build/vm/ADPCMCodecPlugin.lib make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 8:57 AM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------------

Hi Rob,

eitheror.exe is made by the makefile. You could try any of

make eitheror.exe make ./eitheror.exe make init

or

rm -rf build make

HTH Eliot

On Sat, Jun 26, 2010 at 9:44 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

Cool. I got it and made more progress. Thanks! Here is the latest errors:

gcc -o build/vm/sqVirtualMachine.o -isystem/usr/include/mingw -I/usr/include/w32 api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-acc umulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funro ll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../ src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/thir d-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FI LE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -D VM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/Cross/vm/sqVirtualMachine.c

make: eitheror.exe: Command not found mkdir: cannot create directory `./build/ADPCMCodecPlugin': File exists make: [build/vm/ADPCMCodecPlugin.lib] Error 1 (ignored) make -C ./build/ADPCMCodecPlugin \ -f../../ \ PLATDIR=../../../platforms SRCDIR=../../../src BASEDIR=../../. \

LIBNAME=ADPCMCodecPlugin XDEFS=-DSQUEAK_BUILTIN_PLUGIN \ ../.././build/vm/ADPCMCodecPlugin.lib make[1]: Entering directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin'

make[1]: *** ../../: Is a directory. Stop. make[1]: Leaving directory `/cygdrive/c/Cog/cygwinbuild/build/ADPCMCodecPlugin' make: *** [build/vm/ADPCMCodecPlugin.lib] Error 2

Cheers, Rob

From: Eliot Miranda Sent: Sunday, June 27, 2010 12:29 AM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------------

On Sat, Jun 26, 2010 at 8:23 PM, Rob Withers reefedjib@yahoo.com wrote:

Eliot,

I am totally lost and quite annoyed at Microsoft at the moment.

I have dx7sdk, which I believe came from the WinTools (MingW) for building squeak on windows. This is "installed" on C:\dx7sdk. I do not believe there are any references to it in the environment variables. It is just 2 directories of files: include and lib. Somehow the MingW tools knew about it when building squeak on windows.

OK, but the Teleplace/Cog build on cygwin doesn't use c:\dx7sdk. It uses platforms/win32/third-party/dx9sdk. I've just added that to the Cog branch and if you update it should appear and the make should work. Here's the command that failed before:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c

Notice the -I../platforms/Cross/vm -I../platforms/win32/third-party/dx9sdk/Include

It was my mistake that I omitted this from the tarball and the Cog branch. Apologies. But is is there now. So update (or if you haven't already check-out http://www.squeakvm.org/svn/squeak/branches/Cog) and you should make more progress.

HTH Eliot

Cygwin knows nothing about these files. Now that I am doing a 'make' with cygwin, I think I need to somehow tell it about the includes and the libs.

I tried updating Cog with 'svn' but it just grabbed the HowToBuild. No other changes. I am unclear what you mean: "Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build".

I thought to grab dx9sdk thinking is was already setup for this in Cog. I tried to find it, and even attempted to d/l a Delphi dx9sdk, which looked all wrong. I ended up going to the borg and d/led their zip. It was 225MB!!! It dropped like a big hairy turd on my hard drive and I unzipped it and ran setup, thinking that maybe that will setup some environment variables of interest.

Went back to a new cygwin bash shell and tried make. Same result.

What should I do?

Thanks, Rob

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:49 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------------

Hi Rob,

that'll teach me to check-in without doing a test build. Turns out @ Teleplace we include the dx9sdk. So I've added this to the Cog branch. You should just need to update and build.

cheers Eliot

On Sat, Jun 26, 2010 at 7:20 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

I have this in C:\dx7sdk. Do I need to include its path or something in cygwin or the gcc call?

Thanks, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 10:18 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------------

Hi Rob,

you need to install the dx7 sdk, e.g. from http://www.brothersoft.com/games/directx-7.html. Build instructions updated accordingly.

cheers Eliot

On Sat, Jun 26, 2010 at 7:02 PM, Rob Withers reefedjib@yahoo.com wrote:

Hey Eliot,

A little progress, followed by another issue. I did have gnutools installed. Removed it and fixed the PATH. Tried make. Unknown. It turns out cygwin does NOT install make and gcc by default. Went through the setup and hand selected make and gcc to be installed.

Now I can make. It started churning files. I got this error:

gcc -o build/vm/sqWin32DirectInput.o -isystem/usr/include/mingw -I/usr/include/w 32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-a ccumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -fun roll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I. ./src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/th ird-party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_ FILE_SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM_NAME="Croquet" -DX86 -DCROQUET -c ../platforms/win32/vm/sqWin32DirectInp ut.c ../platforms/win32/vm/sqWin32DirectInput.c:31:1: warning: "HMONITOR_DECLARED" re defined In file included from /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32 api/windows.h:48, from ../platforms/win32/vm/sqWin32DirectInput.c:27: /usr/lib/gcc/i686-pc-mingw32/3.4.4/../../../../include/w32api/windef.h:283:1: wa rning: this is the location of the previous definition ../platforms/win32/vm/sqWin32DirectInput.c:35:20: dinput.h: No such file or dire ctory ../platforms/win32/vm/sqWin32DirectInput.c:45: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:45: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c:46: error: parse error before '*' tok en ../platforms/win32/vm/sqWin32DirectInput.c:46: warning: data definition has no t ype or storage class ../platforms/win32/vm/sqWin32DirectInput.c: In function `InitDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:57: error: `DIPROPDWORD' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: (Each undeclared identifie r is reported only once ../platforms/win32/vm/sqWin32DirectInput.c:57: error: for each function it appea rs in.) ../platforms/win32/vm/sqWin32DirectInput.c:57: error: parse error before "propWo rd" ../platforms/win32/vm/sqWin32DirectInput.c:64: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:64: error: `GUID_SysMouse' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:68: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:68: error: `c_dfDIMouse' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:72: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:74: error: `DISCL_NONEXCLUSIVE' undec lared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:75: error: `DISCL_BACKGROUND' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:79: error: `propWord' undeclared (fir st use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:80: error: `DIPROPHEADER' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:82: error: `DIPH_DEVICE' undeclared ( first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:85: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:85: error: `DIPROP_BUFFERSIZE' undecl ared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:89: error: request for member `lpVtbl ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `FreeDirectInput': ../platforms/win32/vm/sqWin32DirectInput.c:97: error: request for member `lpVtbl ' in something not a structure or union $ ' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:102: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `DumpBufferedMouseTrail' : ../platforms/win32/vm/sqWin32DirectInput.c:110: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:110: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:117: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:119: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:123: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:125: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c: In function `GetBufferedMouseTrail':

../platforms/win32/vm/sqWin32DirectInput.c:144: error: `DIDEVICEOBJECTDATA' unde clared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:144: error: parse error before "data"

../platforms/win32/vm/sqWin32DirectInput.c:166: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:168: error: `data' undeclared (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:172: error: `DIERR_INPUTLOST' undecla red (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:174: error: request for member `lpVtb l' in something not a structure or union ../platforms/win32/vm/sqWin32DirectInput.c:195: error: `DIMOFS_X' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:196: error: `DIMOFS_Y' undeclared (fi rst use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:216: error: `DIMOFS_BUTTON0' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:217: error: `DIMOFS_BUTTON1' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:218: error: `DIMOFS_BUTTON2' undeclar ed (first use in this function) ../platforms/win32/vm/sqWin32DirectInput.c:219: error: `DIMOFS_BUTTON3' undeclar ed (first use in this function) make: *** [build/vm/sqWin32DirectInput.o] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Saturday, June 26, 2010 9:33 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

------------------------------------------------------------------

Hi Rob,

your path is wrong. You should be picking up make and gcc 3.4.4 form your cygwin installation not from C:\GNUTools\bin\make.exe. Cog won't build with the old GNUTools. It needs cygwin with at least a gcc that supports sse2. 2.95 is alas too old.

So check that your commands are of the same or later version than

mcstalkerxp.cygwinbuild$ which make /usr/bin/make mcstalkerxp.cygwinbuild$ make -v GNU Make 3.81 Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

This program built for i686-pc-cygwin mcstalkerxp.cygwinbuild$ which gcc /usr/bin/gcc mcstalkerxp.cygwinbuild$ gcc -v Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specs Configured with: /managed/gcc-build/final-v3-bootstrap/gcc-3.4.4-999/configure --verbose --program-suffix=-3 --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc--libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,d,f77,pascal,java,objc --enable-nls --without-included-gettext --enable-version-specific-runtime-libs --without-x --enable-libgcj --disable-java-awt --with-system-zlib --enable-interpreter --disable-libgcj-debug --enable-threads=posix --enable-java-gc=boehm --disable-win32-registry --enable-sjlj-exceptions --enable-hash-synchronization --enable-libstdcxx-debugThread model: posix gcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)

cheers Eliot

On Sat, Jun 26, 2010 at 6:14 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

I tried what you suggest: 1. check-out http://www.squeakvm.org/svn/squeak/branches/Cog 2. build with Cygwin bash

It took some digging, but I found my "C" drive in the dir structure of cygwin and found Cog. I cd into cygwinbuild and 'make'. I get the following error:

gcc -o build/vm/gcc3x-cointerp.o -isystem/usr/include/mingw -I/usr/include/w32ap i -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accum ulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll -loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf -I. -I../sr c/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../platforms/win32/third- party/dx9sdk/Include -D_WIN32_WINNT=0x0501 -DWINVER=0x0501 -DWIN32 -DWIN32_FILE _SUPPORT -DNO_ISNAN -DNO_SERVICE -DNO_STD_FILE_SUPPORT -DNDEBUG -DLSB_FIRST -DVM _NAME="Croquet" -DX86 -DCROQUET -c ../src/vm/gcc3x-cointerp.c cc1.exe: Invalid option `sse2' cc1.exe: Invalid option `win32' cc1.exe: Invalid option `ms-bitfields' cc1.exe: Invalid option `no-accumulate-outgoing-args' cc1.exe: bad value (pentium4) for -march= switch ../src/vm/gcc3x-cointerp.c:1335: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1434: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1452: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c:1485: warning: initialization from incompatible point er type ../src/vm/gcc3x-cointerp.c: In function `callbackEnter': ../src/vm/gcc3x-cointerp.c:10544: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c:10545: warning: assignment discards qualifiers from p ointer target type ../src/vm/gcc3x-cointerp.c: In function `highBit': ../src/vm/gcc3x-cointerp.c:17423: warning: left shift count >= width of type ../src/vm/gcc3x-cointerp.c:17424: warning: right shift count >= width of type ../src/vm/gcc3x-cointerp.c: In function `primitiveClockLogAddresses': ../src/vm/gcc3x-cointerp.c:24296: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c:24297: warning: passing arg 1 of `positive32BitIntege rFor' makes integer from pointer without a cast ../src/vm/gcc3x-cointerp.c: In function `readImageFromFileHeapSizeStartingAt': ../src/vm/gcc3x-cointerp.c:40746: warning: assignment makes integer from pointer without a cast C:\GNUTools\bin\make.exe: *** [build/vm/gcc3x-cointerp.o] Error 1

Thanks, Rob

PS. The US lost Good luck to England.

From: Eliot Miranda Sent: Saturday, June 26, 2010 8:30 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

----------------------------------------------------------------

Hi Rob,

On Fri, Jun 25, 2010 at 5:32 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

Is it possible someone has generated another experimental VM for revision 16? I am hoping so. I have attempted to make with cygwin with poor results. Here is what I did:

These steps are now obsolete. Instead simply check-out http://www.squeakvm.org/svn/squeak/branches/Cog and build. I've updated the build instructions there-in. One thing wrong with the old HowToBuild is its specifying the use of a cmd shell instead of a cygwin bash shell.

HTH Eliot

1. Install the latest cygwin (cygwin 1.7.5-1) 2. Download and un-tarball OpenSourceCog-oscog.16.tar.gz 3. Download VMMaker-oscog.16.mcz 4. Download Cog-eem.40.mcz 5. Read README and cygwinbuild\HowToBuild 6. Try to svn checkout code (platforms, src, cygwinbuild) - ERROR svn: OPTIONS of 'https://dev.qwaq.com/svn/XXX/trunk/platforms': Could not resolv e hostname `dev.qwaq.com': The requested name is valid, but no data of the reque sted type was found. (https://dev.qwaq.com) 7. Since platforms and src are already there, try make. Command prompt - cd into cygwinbuild and make. Error listed below. 8. Run VMMaker-Squeak4.1.image image in image and regenerate sources. Had to edit the directory separator from '/' to ''. Regenerated sources. 9. Run make again and unsurprisingly get the same error.

Cygwinbuild make ERROR - C:\Program Files\Squeak 4.1\CogSqueak4.1\cygwinbuild>make Makefile:281: warning: overriding commands for target `Croquet.res' Makefile:263: warning: ignoring old commands for target `Croquet.res' ---------------- Makefile settings ------------------ VPATH=../src/vm ../platforms/win32/vm ../platforms/Cross/vm INCLUDES=-I. -I../src/vm -I../platforms/win32/vm -I../platforms/Cross/vm -I../pl atforms/win32/third-party/dx9sdk/Include CFLAGS=-isystem/usr/include/mingw -I/usr/include/w32api -msse2 -ggdb2 -mwindows -mno-cygwin -mwin32 -mno-rtd -mms-bitfields -mno-accumulate-outgoing-args -D_MT -O2 -march=pentium4 -momit-leaf-frame-pointer -funroll-loops -fno-builtin-printf -fno-builtin-putchar -fno-builtin-fprintf INTERNAL_PLUGINS=ADPCMCodecPlugin AsynchFilePlugin B3DAcceleratorPlugin B2DPlugi n BitBltPlugin BMPReadWriterPlugin CroquetPlugin ZipPlugin DropPlugin DSAPrims F FTPlugin FilePlugin FloatArrayPlugin FloatMathPlugin HostWindowPlugin IA32ABI Jo ystickTabletPlugin JPEGReaderPlugin JPEGReadWriter2Plugin Klatt LargeIntegers Lo calePlugin Matrix2x3Plugin MIDIPlugin MiscPrimitivePlugin Mpeg3Plugin RePlugin S ecurityPlugin SerialPlugin SocketPlugin SoundCodecPrims SoundGenerationPlugin St arSqueakPlugin SurfacePlugin UUIDPlugin EXTERNAL_PLUGINS=SqueakFFIPrims Win32OSProcessPlugin LIBS=./build/vm/ADPCMCodecPlugin.lib ./build/vm/AsynchFilePlugin.lib ./build/vm/ B3DAcceleratorPlugin.lib ./build/vm/B2DPlugin.lib ./build/vm/BitBltPlugin.lib ./ build/vm/BMPReadWriterPlugin.lib ./build/vm/CroquetPlugin.lib ./build/vm/ZipPlug in.lib ./build/vm/DropPlugin.lib ./build/vm/DSAPrims.lib ./build/vm/FFTPlugin.li b ./build/vm/FilePlugin.lib ./build/vm/FloatArrayPlugin.lib ./build/vm/FloatMath Plugin.lib ./build/vm/HostWindowPlugin.lib ./build/vm/IA32ABI.lib ./build/vm/Joy stickTabletPlugin.lib ./build/vm/JPEGReaderPlugin.lib ./build/vm/JPEGReadWriter2 Plugin.lib ./build/vm/Klatt.lib ./build/vm/LargeIntegers.lib ./build/vm/LocalePl ugin.lib ./build/vm/Matrix2x3Plugin.lib ./build/vm/MIDIPlugin.lib ./build/vm/Mis cPrimitivePlugin.lib ./build/vm/Mpeg3Plugin.lib ./build/vm/RePlugin.lib ./build/ vm/SecurityPlugin.lib ./build/vm/SerialPlugin.lib ./build/vm/SocketPlugin.lib ./ build/vm/SoundCodecPrims.lib ./build/vm/SoundGenerationPlugin.lib ./build/vm/Sta rSqueakPlugin.lib ./build/vm/SurfacePlugin.lib ./build/vm/UUIDPlugin.lib DLLS=./build/vm/SqueakFFIPrims.dll ./build/vm/Win32OSProcessPlugin.dll ----------------------------------------------------- The syntax of the command is incorrect. make: [build/vm] Error 1 (ignored) mkdir ./build/vm The syntax of the command is incorrect. make: *** [build/vm] Error 1

Cheers, Rob

---- The Modern Whig Party of Virginia - http://vawhigs.org

From: Eliot Miranda Sent: Friday, June 25, 2010 1:13 PM To: Squeak Virtual Machine Development Discussion Subject: Re: [Vm-dev] Squeak 4.1 VM crash

--------------------------------------------------------------

Hi Rob,

you're running a Cog VM derived from VMMaker-oscog.11. VMMaker-oscog.16 has some important fixes. You might want to update.

best Eliot

On Fri, Jun 25, 2010 at 4:29 AM, Rob Withers reefedjib@yahoo.com wrote:

Here is the crash dump from the Cog VM

-------------------------------------------------- From: "Rob Withers" reefedjib@yahoo.com Sent: Friday, June 25, 2010 7:20 AM To: "Squeak VM Dev" vm-dev@lists.squeakfoundation.org Subject: [Vm-dev] Squeak 4.1 VM crash

I am running the Cog image on the stock Squeak 4.1 vm. I was testing the Cryptography package. There are two test cases that are now failing: CryptoRigndaelCBCTest>>#testByteArrayFromHexString and CryptoX509Test>>#testSignatureValidation for unknown reasons.

I decided to Run Coverage. I am not really sure what this does, but I was trying to find a way to get performance numbers and then compare to the Cog VM.

I got the attached crash dump.

Rob

Hi Rob, Hi All,

this is a case of Cog's not yet supporting objects as methods. TestCoverage uses the objects as methods support and this hasn't been implemented in Cog because we've not used it at Teleplace. For the moment... don't do that ;)

cheers Eliot

[repost to limbo under the 100k per message bar]

On Sun, Jun 27, 2010 at 5:07 PM, Rob Withers reefedjib@yahoo.com wrote:

Hi Eliot,

Squeak V4.1: This is happening in base Squeak V4.1, that I downloaded from squeak.org, I believe. It is using the stock Squeak4.1.image with Cryptography-cmm.13.mcz loaded from http://www.squeaksource.com/Cryptography repository.

1. Select a test case from Cryptography-Tests
2. Click 'run coverage'
3. select Cryptography package
4. BOOM!

Cog VM: I build the Cog Vm today from VMMaker-oscog.17.mcz. This is from your tarball plus I did a svn check-out. It is with Cryptography-cmm.13.mcz loaded from http://www.squeaksource.com/Cryptography repository.

1. Select a test case from Cryptography-Tests
2. Click 'run coverage'
3. select Cryptography package
4. BOOM!

AND

1. Select StackInterpreterTests from VMMaker-Tests
2. Click 'run coverage'
3. select VMMaker package
4. BOOM!

AND

1. Select UPackageTestCase from Universes-Tests
2. Click 'run coverage'
3. select Universes package
4. BOOM!

I hope this helps, Rob