Hi,
Metacello new baseline: 'Roassal3'; repository: 'github://tom95/Roassal3'; load.
will get you started, then you will have to handle the various errors that arise from the incorrect load order. Repeating the whole command once it's done will allow you to recover from some load errors, too.
Best, Tom
On Sat, Oct 3, 2020 at 10:21 PM gettimothy via Squeak-dev < squeak-dev@lists.squeakfoundation.org> wrote:
Hi Tom
Thank you for the detailed reply.
Re:"I would recommend using Metacello for loading it first, as it will install all dependencies. "
Where do I find that Metaccello? I assume I will need a ConfigurationOfRoassal3 frome somewhere.
Regarding the fork, I think yours us the way to go until I get the lay of the land. I haven't even wirked through roassak examples on pharo yet.
When we get smooth installation abd Eliot has time to putter with it, the community can decide on the Athens thing.
Thanks again
---- On Sat, 03 Oct 2020 15:57:43 -0400 *tomjonabc@gmail.com tomjonabc@gmail.com * wrote ----
Hi timothy,
the snippet from Jakob should give you the updated Tonel such that you can load Roassal and its dependencies, at least syntax/format-wise. I would recommend using Metacello for loading it first, as it will install all dependencies. If you use my fork, you will get the "repaired" Geometry package. Afterwards, you can use the GitBrowser for proper development by cloning my Roassal fork and then checking out the code. Note that you will hit a great number of missing dependencies, which you need to all "Proceed" and potentially also fix manually. Some code may not be properly overridden, so be sure to check the -Squeak packages for missing overrides if you hit an error in a specific method. I'm hoping to get around to investigate the proper Baseline load order sometime in the next few days (especially also for my own curiosity...).
Concerning next steps for porting: you can base your work off of my fork (for example simply fork it again and if you like, place pull requests). Or alternatively, take a different route to porting, potentially keeping Athens, and base your own work on the Roassal main repo.
I'll provide a quick description of the things in my fork in the following. There are three packages with adaptations for Squeak (of which the naming can be improved):
- Roassal3-Pharo-Squeak: some classes from the Pharo Base System that
Roassal assumes exist. For a proper port, I would want to get rid of this entirely and instead introduce adapter where necessary. This has to be loaded first as Roassal3 (core) wants to extend these classes, too.
- Roassal3-Squeak: this is the proper port, mostly the Balloon code for
rendering and for our Morph.
- Roassal3-Shapes-Squeak: the -Shapes package uses some functions from the
font system. We need to override these. We can't put these in our other -Squeak package because we first need the other classes to be loaded.
Important todo items that I can currently see:
- only the basic packages work (I tested Charts in particular); others
have different dependencies into the Pharo system (e.g. UML)
- quality and performance are lacking when compared to the Cairo/Athens
version
- fonts do not scale currently
Best, Tom
On Sat, Oct 3, 2020 at 8:41 PM gettimothy via Squeak-dev < squeak-dev@lists.squeakfoundation.org> wrote:
Hi,
Thanks.
On a brand new squeak6.0 alpha (easily spun up thanks to the squeak-launcher (:) git tools, etc installed via the preference wizard. BaselineOftonel is in Monticello browser.
I run
repository: 'github://squeak-smalltalk/squeak-tonel:squeak'; baseline: 'Tonel'; get; load.
works fine.
Open the Git browser,
Add Roassal3 project.
RHClick..Add remote copy-n-paste in https://github.com/gettimothy/hello-world.git https://github.com/tom95/Roassal3
MNU Text(Object) does not understand #includesSubstring:
what am I missing?
thx
The MNU again on ---- On Sat, 03 Oct 2020 13:15:11 -0400 *Jakob Reschke <forums.jakob@resfarm.de forums.jakob@resfarm.de>* wrote ----
Hi,
Tom provided the fix and the pull request, and I integrated it. So yes, we work together.
Now to update an existing installation I suppose one should use Metacello:
Metacello new repository: 'github://squeak-smalltalk/squeak-tonel:squeak'; baseline: 'Tonel'; get; load.
Kind regards, Jakob
Am Sa., 3. Okt. 2020 um 18:26 Uhr schrieb gettimothy gettimothy@zoho.com:
Tom,
Thank you very much for your work.
Is this in support of Jakob's pull request? i.e. are you two working
together?
How should I proceed from here? Pull from your repo?
cheers,
t
---- On Sat, 03 Oct 2020 10:49:20 -0400 Tom Beckmann <
tomjonabc@gmail.com> wrote ----
Hi timothy, (you'll probably be seeing this mail twice, my first attempt bounced on
the ML because my mail address had changed, sorry!)
after I read yours and Eliot's conversation, I went to try loading
Roassal3 to see how our Tonel support is doing. I stumbled over three errors:
- The error you just mentioned [1]
- Monticello was not strict enough with matching MCReader capabilities
[2]
- The Geometry package used in Roassal uses Unicode symbols in their
code, which is not supported in Squeak [3]
I then went ahead and tried to adapt things a little and got the result
you can see in the attachment. The experiment is found here [4]. I decided to not load Athena at all and started putting together an alternative Balloon backend instead (I am aware that Athena has a Balloon backend as well, the one I found consisted mostly of stubs, however). The resulting quality does not compare with Cairo, of course, but the basics were up and running very quickly.
In theory, this should give you the working installation, however,
packages load out-of-order because I did not manage to the baseline quite right just yet:
Metacello new baseline: 'Roassal3'; repository: 'github://tom95/Roassal3'; load.
Best, Tom
[1] https://github.com/squeak-smalltalk/squeak-tonel/pull/5 [2]
http://forum.world.st/The-Inbox-Monticello-tobe-729-mcz-td5122924.html
[3]
https://github.com/tom95/Geometry/commit/5e7e1fa89bbd699baf41066e33d6242730d...
[4] https://github.com/tom95/Roassal3
On Sat, Oct 3, 2020 at 4:38 PM gettimothy via Squeak-dev <
squeak-dev@lists.squeakfoundation.org> wrote:
Thank you.
If you are interested, I will be figuring out Pillar with this github
stuff and getting the beginnings of some books up on squeakbooks.org*
I will be documenting these steps in a booklet.
This squot/git stuff will both be used and the subject of that booklet.
good stuff.
thanks for your work.
*Help Browser team...I am confident that an XTreams-Parsing grammar
/actor pair can be written to auto-generate HelpBrowser books from the Pillar to the Help Browser.
---- On Sat, 03 Oct 2020 10:32:02 -0400 Jakob Reschke <
forums.jakob@resfarm.de> wrote ----
I am in the middle of integrating a pull request to solve this bug in squeak-tonel. :-)
-- Sent from: http://forum.world.st/Squeak-Dev-f45488.html
Tom thank you.
I willhit it tomorrow!
I am really looking forward to this port.
Cheers.
T
---- On Sat, 03 Oct 2020 17:26:32 -0400 tomjonabc@gmail.com wrote ----
Hi,
Metacello new baseline: 'Roassal3'; repository: 'github://tom95/Roassal3'; load.
will get you started, then you will have to handle the various errors that arise from the incorrect load order. Repeating the whole command once it's done will allow you to recover from some load errors, too.
Best, Tom
On Sat, Oct 3, 2020 at 10:21 PM gettimothy via Squeak-dev squeak-dev@lists.squeakfoundation.org wrote:
Hi Tom
Thank you for the detailed reply.
Re:"I would recommend using Metacello for loading it first, as it will install all dependencies. "
Where do I find that Metaccello? I assume I will need a ConfigurationOfRoassal3 frome somewhere.
Regarding the fork, I think yours us the way to go until I get the lay of the land. I haven't even wirked through roassak examples on pharo yet.
When we get smooth installation abd Eliot has time to putter with it, the community can decide on the Athens thing.
Thanks again
---- On Sat, 03 Oct 2020 15:57:43 -0400 tomjonabc@gmail.com wrote ----
Hi timothy,
the snippet from Jakob should give you the updated Tonel such that you can load Roassal and its dependencies, at least syntax/format-wise. I would recommend using Metacello for loading it first, as it will install all dependencies. If you use my fork, you will get the "repaired" Geometry package. Afterwards, you can use the GitBrowser for proper development by cloning my Roassal fork and then checking out the code. Note that you will hit a great number of missing dependencies, which you need to all "Proceed" and potentially also fix manually. Some code may not be properly overridden, so be sure to check the -Squeak packages for missing overrides if you hit an error in a specific method. I'm hoping to get around to investigate the proper Baseline load order sometime in the next few days (especially also for my own curiosity...).
Concerning next steps for porting: you can base your work off of my fork (for example simply fork it again and if you like, place pull requests). Or alternatively, take a different route to porting, potentially keeping Athens, and base your own work on the Roassal main repo.
I'll provide a quick description of the things in my fork in the following. There are three packages with adaptations for Squeak (of which the naming can be improved): - Roassal3-Pharo-Squeak: some classes from the Pharo Base System that Roassal assumes exist. For a proper port, I would want to get rid of this entirely and instead introduce adapter where necessary. This has to be loaded first as Roassal3 (core) wants to extend these classes, too. - Roassal3-Squeak: this is the proper port, mostly the Balloon code for rendering and for our Morph. - Roassal3-Shapes-Squeak: the -Shapes package uses some functions from the font system. We need to override these. We can't put these in our other -Squeak package because we first need the other classes to be loaded.
Important todo items that I can currently see: - only the basic packages work (I tested Charts in particular); others have different dependencies into the Pharo system (e.g. UML) - quality and performance are lacking when compared to the Cairo/Athens version - fonts do not scale currently
Best, Tom
On Sat, Oct 3, 2020 at 8:41 PM gettimothy via Squeak-dev squeak-dev@lists.squeakfoundation.org wrote:
Hi,
Thanks.
On a brand new squeak6.0 alpha (easily spun up thanks to the squeak-launcher (:)
git tools, etc installed via the preference wizard.
BaselineOftonel is in Monticello browser.
I run
repository: 'github://squeak-smalltalk/squeak-tonel:squeak';
baseline: 'Tonel';
get; load.
works fine.
Open the Git browser,
Add Roassal3 project.
RHClick..Add remote copy-n-paste in
https://github.com/tom95/Roassal3
MNU Text(Object) does not understand #includesSubstring:
what am I missing?
thx
The MNU again on
---- On Sat, 03 Oct 2020 13:15:11 -0400 Jakob Reschke forums.jakob@resfarm.de wrote ----
Hi,
Tom provided the fix and the pull request, and I integrated it. So yes, we work together.
Now to update an existing installation I suppose one should use Metacello:
Metacello new repository: 'github://squeak-smalltalk/squeak-tonel:squeak'; baseline: 'Tonel'; get; load.
Kind regards, Jakob
Am Sa., 3. Okt. 2020 um 18:26 Uhr schrieb gettimothy gettimothy@zoho.com:
Tom,
Thank you very much for your work.
Is this in support of Jakob's pull request? i.e. are you two working together?
How should I proceed from here? Pull from your repo?
cheers,
t
---- On Sat, 03 Oct 2020 10:49:20 -0400 Tom Beckmann tomjonabc@gmail.com wrote ----
Hi timothy, (you'll probably be seeing this mail twice, my first attempt bounced on the ML because my mail address had changed, sorry!)
after I read yours and Eliot's conversation, I went to try loading Roassal3 to see how our Tonel support is doing. I stumbled over three errors:
- The error you just mentioned [1]
- Monticello was not strict enough with matching MCReader capabilities [2]
- The Geometry package used in Roassal uses Unicode symbols in their code, which is not supported in Squeak [3]
I then went ahead and tried to adapt things a little and got the result you can see in the attachment. The experiment is found here [4]. I decided to not load Athena at all and started putting together an alternative Balloon backend instead (I am aware that Athena has a Balloon backend as well, the one I found consisted mostly of stubs, however). The resulting quality does not compare with Cairo, of course, but the basics were up and running very quickly.
In theory, this should give you the working installation, however, packages load out-of-order because I did not manage to the baseline quite right just yet:
Metacello new baseline: 'Roassal3'; repository: 'github://tom95/Roassal3'; load.
Best, Tom
[1] https://github.com/squeak-smalltalk/squeak-tonel/pull/5 [2] http://forum.world.st/The-Inbox-Monticello-tobe-729-mcz-td5122924.html [3] https://github.com/tom95/Geometry/commit/5e7e1fa89bbd699baf41066e33d6242730d... [4] https://github.com/tom95/Roassal3
On Sat, Oct 3, 2020 at 4:38 PM gettimothy via Squeak-dev squeak-dev@lists.squeakfoundation.org wrote:
Thank you.
If you are interested, I will be figuring out Pillar with this github stuff and getting the beginnings of some books up on squeakbooks.org*
I will be documenting these steps in a booklet.
This squot/git stuff will both be used and the subject of that booklet.
good stuff.
thanks for your work.
*Help Browser team...I am confident that an XTreams-Parsing grammar /actor pair can be written to auto-generate HelpBrowser books from the Pillar to the Help Browser.
---- On Sat, 03 Oct 2020 10:32:02 -0400 Jakob Reschke forums.jakob@resfarm.de wrote ----
I am in the middle of integrating a pull request to solve this bug in squeak-tonel. :-)
-- Sent from: http://forum.world.st/Squeak-Dev-f45488.html
squeak-dev@lists.squeakfoundation.org
-
gettimothy -
Tom Beckmann