Hi Jaromir,

I have merged KernelTests-jar.449 into the trunk and also removed the redundant nil checks in the TraceDebugger. :-)

Best,
Christoph

---
Sent from Squeak Inbox Talk

On 2024-01-02T20:05:31+01:00, christoph.thiede@student.hpi.uni-potsdam.de wrote:

> Hi Jaromir,
>
> thanks for the clarification. If you don't mind I would still wait for a couple of days to see whether Eliot or Marcel or someone else who are longer aboard find anything against your change, but I have been convinced by you. :-) After that, we can merge your open test and eliminate the ifNil checks in the TraceDebugger and also in the penultimate line of Context>>#return:from:.
>
> > In general, some methods are "pure simulation" methods intended to mimic the VM behavior (#step etc) but nothing prevents one from using them for other purposes - like what #runUntilErrorOrReturnFrom: did: to just get rid of some contexts). Is it ok to do that? I tend to think it's not; it's confusing. That's why I made #stepToCalleeOrNil a private method because it's not a "true" simulation method but a sort of hybrid.
>
> Yes, I think I understand your point here, the assumptions and use cases for #stepToCalleeOrNil are too special to expose it to everyone. Clients should mainly use #step, #stepToCallee, or maybe - with care - #runUntilErrorOrReturnFrom: to advance a context I think.
>
> > This is also why I checked Jakob's Git Browser and all tests seem fine.
>
> Wait, Squot is using code simulation?
>
> Best,
> Christoph
>
> ---
> Sent from Squeak Inbox Talk
>
> On 2024-01-02T11:25:57+00:00, mail(a)jaromir.net wrote:
>
> > Hi Christoph,
> >
> > correct me if I'm wrong: with the corrected #step semantics (the
> > #return:from: fix) one should no longer need to do things like:
> >
> > self step ifNil: [^ self]
> >
> > because #step should always return a context, even if attempting to step
> > to a nil context:
> >
> > [] asContext step
> >
> > In this case it correctly returns the #cannotReturn: context.
> >
> > I've noticed these nil checks in Trace debugger's #doStepOver or
> > #stepToHome.
> >
> > I hope I haven't overlooked anything :)
> >
> > Thanks for your thoughts,
> > Jaromir
> >
> >
> > On 31-Dec-23 10:42:54 AM, "Jaromir Matas" <mail(a)jaromir.net> wrote:
> >
> > >Hi Christoph,
> > >
> > >Yes, that's exactly what I was talking about - the #return:from: fix
> > >changes slightly (perhaps it's better to say corrects) the semantics of
> > >some stepping methods - #step and #stepToCallee, which allowed
> > >illegally stepping into a dead or nil context. They can no longer be
> > >used in the manner you showed. Another example was
> > >#runUntilErrorOrReturnFrom: - it used #stepToCallee this way so as a
> > >workaround I created the #stepToCalleeOrNil method and used in
> > >#runUntilErrorOrReturnFrom:
> > >
> > > [ctxt isDead or: [topContext isNil]] whileFalse: [topContext :=
> > >topContext stepToCalleeOrNil].
> > >
> > >Theoretically there might be some external code (mis)using the
> > >incorrect stepping semantics. In Pharo's trunk they were mainly tests
> > >and #stepToHome but I haven't checked any external code. But all their
> > >tests are green with this change and I guess it's not widespread.
> > >
> > >This is also why I checked Jakob's Git Browser and all tests seem fine.
> > >
> > >My opinion is to keep the correct simulation semantics and deal with
> > >potential consequences as/if they come. However I don't expect a huge
> > >impact as the change only affects border situations.
> > >
> > >In general, some methods are "pure simulation" methods intended to
> > >mimic the VM behavior (#step etc) but nothing prevents one from using
> > >them for other purposes - like what #runUntilErrorOrReturnFrom: did: to
> > >just get rid of some contexts). Is it ok to do that? I tend to think
> > >it's not; it's confusing. That's why I made #stepToCalleeOrNil a
> > >private method because it's not a "true" simulation method but a sort
> > >of hybrid.
> > >
> > >What do you think?
> > >
> > >Thanks for reviewing the fix!
> > >Best,
> > >Jaromir
> > >
> > >
> > >
> > >On 30-Dec-23 11:07:54 PM, christoph.thiede(a)student.hpi.uni-potsdam.de
> > >wrote:
> > >
> > >>Hi Jaromir,
> > >>
> > >>I found a breaking change in the new behavior of
> > >>Context>>#return:from: while using the TraceDebugger:
> > >>
> > >>In the past we could say:
> > >>
> > >>c:=[2+3]asContext.
> > >>[c]whileNotNil:[c:=cstep].
> > >>
> > >>With your change, the script runs forever because the last step does
> > >>not answer nil as before but activates a new #cannotReturn:.
> > >>
> > >>This behavior seems not be expected anywhere in the trunk (if my first
> > >>search was complete), and you are right that the new behavior aligns
> > >>closer to the VM behavior. Still, the old code seemed to explicitly
> > >>intend this - see the "newTop ifNotNil:" at the bottom of the method.
> > >>
> > >>I wonder whether we should keep this. For me it is not a big deal; I
> > >>can just change my script like this:
> > >>
> > >>c:=[2+3]asContext.
> > >>[csenderisNiland:[cwillReturn]]whileNotNil:[c:=cstep].
> > >>
> > >>I just wonder whether this could a breaking or unintended change for
> > >>anything else. For [^2] ensure: [] it would not be a big deal, we
> > >>could just change the check in question to
> > >>(aSenderisDeador:[newTopnotNiland:[newTopisDead]])ifTrue:. I am
> > >>tending against restoring the old behavior, but I am unsure. What is
> > >>your opinion on this?
> > >>
> > >>Best,
> > >>Christoph
> > >>
> > >>---
> > >>Sent from Squeak Inbox Talk
> > >><https://github.com/hpi-swa-lab/squeak-inbox-talk>
> > >>
> > >>On 2023-12-30T21:13:37+00:00, mail(a)jaromir.net wrote:
> > >>
> > >> > > nit: You mixed up the order of arguments for #assert:equals:
> > >> >
> > >> > oops, sorry :) It happens to me all the time; I've never actually
> > >> > understood why the strange, almost Yodaesque, order... as if you
> > >>asked
> > >> > in English:
> > >> >
> > >> > "Make sure 18 is his age."
> > >> >
> > >> > Thanks,
> > >> > Jaromir
> > >> >
> > >> >
> > >> > On 30-Dec-23 9:13:56 PM,
> > >>christoph.thiede(a)student.hpi.uni-potsdam.de
> > >> > wrote:
> > >> >
> > >> > >nit: You mixed up the order of arguments for #assert:equals: (it is
> > >> > >assert: expected equals: actual) and could have used it in the
> > >>final
> > >> > >assert again, but that's clearly no reason to hold back a useful
> > >>test.
> > >> > >;-) Merged, thanks! :-)
> > >> > >
> > >> > >Best,
> > >> > >Christoph
> > >> > >
> > >> > >---
> > >> > >Sent from Squeak Inbox Talk
> > >> > ><https://github.com/hpi-swa-lab/squeak-inbox-talk>
> > >> > >
> > >> > >On 2023-12-30T17:33:08+00:00, mail(a)jaromir.net wrote:
> > >> > >
> > >> > > > Hi Christoph,
> > >> > > >
> > >> > > > Thanks for merging the fixes; I've just sent another test in
> > >> > > > KernelTests-jar.448 to complement them.
> > >> > > >
> > >> > > > Please take a look and if ok I'd appreciate it if you could
> > >>merge it
> > >> > >as
> > >> > > > well.
> > >> > > >
> > >> > > > Best regards and Happy New Year to you too!
> > >> > > > Jaromir
> > >> > > >
> > >> > > >
> > >> > > > On 30-Dec-23 6:15:25 PM,
> > >> > >christoph.thiede(a)student.hpi.uni-potsdam.de
> > >> > > > wrote:
> > >> > > >
> > >> > > > >Hi Jaromir, hi all,
> > >> > > > >
> > >> > > > >finally I have found the time to review these suggestions.
> > >> > > > >Kernel-jar.1537, Kernel-jar.1538, and Kernel-jar.1539 look
> > >>excellent
> > >> > >to
> > >> > > > >me as well. Clear, straightforward, useful. :-) I have merged
> > >>them
> > >> > >into
> > >> > > > >the trunk via Kernel-ct.1545.
> > >> > > > >
> > >> > > > >Regarding DebuggerTests>>test16HandleSimulationError, I have
> > >>patched
> > >> > >it
> > >> > > > >via ToolsTests-ct.125. Nothing to rack your brains over:
> > >> > >"thisContext
> > >> > > > >pc: nil" just mimicks any kind of unhandled error inside the
> > >> > >simulator
> > >> > > > >- since we now gently handle this via #cannotReturn:, I just
> > >> > >replaced
> > >> > > > >it with "thisContext pc: false". :-) Sorry for not clarifying
> > >>that
> > >> > > > >earlier and letting you speculate.
> > >> > > > >
> > >> > > > >Thanks for your work, and I already wish you a happy new year!
> > >> > > > >
> > >> > > > >Best,
> > >> > > > >Christoph
> > >> > > > >
> > >> > > > >---
> > >> > > > >Sent from Squeak Inbox Talk
> > >> > > > ><https://github.com/hpi-swa-lab/squeak-inbox-talk>
> > >> > > > >
> > >> > > > >On 2023-11-29T13:31:09+00:00, mail(a)jaromir.net wrote:
> > >> > > > >
> > >> > > > > > Hi Marcel,
> > >> > > > > >
> > >> > > > > > > [myself] whether the patch would have been necessary
> > >>should the
> > >> > > > > > #return:from: had been fixed then
> > >> > > > > >
> > >> > > > > > Nonsense, I just mixed it up with another issue :)
> > >> > > > > >
> > >> > > > > >
> > >> > > > > > On 29-Nov-23 1:51:21 PM, "Jaromir Matas"
> > >><mail(a)jaromir.net>
> > >> > >wrote:
> > >> > > > > >
> > >> > > > > > >Thanks Marcel! This test somehow slipped my attention :)
> > >> > > > > > >
> > >> > > > > > >The test can no longer work as is. It takes advantage of
> > >>the
> > >> > > > >erroneous
> > >> > > > > > >behavior of #return:from: in the sense that if you simulate
> > >> > > > > > >
> > >> > > > > > > thisContext pc: nil
> > >> > > > > > >
> > >> > > > > > >it'll happily return to a dead context (i.e. to thisContext
> > >>from
> > >> > > > >#pc:
> > >> > > > > > >nil context) - which is not what the VM does during
> > >>runtime. It
> > >> > > > >should
> > >> > > > > > >immediately raise an illegal return exception not only
> > >>during
> > >> > > > >runtime
> > >> > > > > > >but also during simulation.
> > >> > > > > > >
> > >> > > > > > >The test mentions a patch for an infinite debugger chain
> > >> > > > > >
> > >> >(http://forum.world.st/I-broke-the-debugger-td5110752.html). I
> > >> > > > >wonder
> > >> > > > > > >whether the problem could have something to do with this
> > >> > >simulation
> > >> > > > >bug
> > >> > > > > > >in return:from:; and a terrible idea occurred to me whether
> > >>the
> > >> > > > >patch
> > >> > > > > > >would have been necessary should the #return:from: had been
> > >> > >fixed
> > >> > > > >then
> > >> > > > > > >;O
> > >> > > > > > >
> > >> > > > > > >We may potentially come up with more examples like this,
> > >>even in
> > >> > >the
> > >> > > > > > >trunk, where the bug from #return:from: propagated and was
> > >>taken
> > >> > > > > > >advantage of. I've found and fixed
> > >>#runUntilErrorOrReturnFrom:
> > >> > >but
> > >> > > > >more
> > >> > > > > > >can still be surviving undetected...
> > >> > > > > > >
> > >> > > > > > >I'd place the test into #expectedFailures for now but maybe
> > >>it's
> > >> > > > >time
> > >> > > > > > >to remove it; Christoph should decide :)
> > >> > > > > > >
> > >> > > > > > >Thanks again,
> > >> > > > > > >Jaromir
> > >> > > > > > >
> > >> > > > > > >
> > >> > > > > > >On 29-Nov-23 10:28:38 AM, "Taeumel, Marcel via Squeak-dev"
> > >> > > > > > ><squeak-dev(a)lists.squeakfoundation.org> wrote:
> > >> > > > > > >
> > >> > > > > > >>Hi Jaromir --
> > >> > > > > > >>
> > >> > > > > > >>Looks good. Still, what about that
> > >>#test16HandleSimulationError
> > >> > > > >now?
> > >> > > > > > >>:-) It is failing with your changes ... how would you
> > >>adapt it?
> > >> > > > > > >>
> > >> > > > > > >>
> > >> > > > > > >>
> > >> > > > > > >>Best,
> > >> > > > > > >>Marcel
> > >> > > > > > >>>Am 28.11.2023 01:29:39 schrieb Jaromir Matas
> > >> > ><mail(a)jaromir.net>:
> > >> > > > > > >>>
> > >> > > > > > >>>Hi Eliot, Marcel, all,
> > >> > > > > > >>>
> > >> > > > > > >>>I've sent a fix Kernel-jar.1539 to the Inbox that solves
> > >>the
> > >> > > > > > >>>remaining bit of the chain of bugs described in the
> > >>previous
> > >> > >post.
> > >> > > > > > >>>All tests are green now and I think the root cause has
> > >>been
> > >> > >found
> > >> > > > >and
> > >> > > > > > >>>fixed.
> > >> > > > > > >>>
> > >> > > > > > >>>In this last bit I've created a version of stepToCallee
> > >>that
> > >> > >would
> > >> > > > > > >>>identify a potential illegal return to a nil sender and
> > >>avoid
> > >> > >it.
> > >> > > > > > >>>
> > >> > > > > > >>>Now this example can be debugged without any problems:
> > >> > > > > > >>>
> > >> > > > > > >>>[[self halt. ^ 1] on: BlockCannotReturn do: #resume ]
> > >>fork
> > >> > > > > > >>>
> > >> > > > > > >>>If you're happy with the solution in Kernel-jar.1539,
> > >> > > > > > >>>Kernel-jar.1538, Kernel-jar.1537 and the test in
> > >> > > > >KernelTests-jar.447,
> > >> > > > > > >>>could you please double-check and merge, please? (And
> > >>remove
> > >> > > > > > >>>Kernel-mt.1534 and Tools-jar.1240 from the Inbox)
> > >> > > > > > >>>
> > >> > > > > > >>>Best,
> > >> > > > > > >>>Jaromir
> > >> > > > > > >>>
> > >> > > > > > >>>
> > >> > > > > > >>>
> > >> > > > > > >>>On 27-Nov-23 12:09:37 AM, "Jaromir Matas"
> > >><mail(a)jaromir.net>
> > >> > > > >wrote:
> > >> > > > > > >>>
> > >> > > > > > >>>>Hi Eliot, Christoph, all
> > >> > > > > > >>>>
> > >> > > > > > >>>>It looks like there are some more skeletons in the
> > >>closet :/
> > >> > > > > > >>>>
> > >> > > > > > >>>>If you run this example
> > >> > > > > > >>>>
> > >> > > > > > >>>>[[self halt. ^ 1] on: BlockCannotReturn do: [:ex | ex
> > >>resume]
> > >> > >]
> > >> > > > >fork
> > >> > > > > > >>>>
> > >> > > > > > >>>>and step over halt and then step over ^1 you get a
> > >> > >nonsensical
> > >> > > > >error
> > >> > > > > > >>>>as a result of decoding nil as an instruction.
> > >> > > > > > >>>>
> > >> > > > > > >>>>It turns out that the root cause is in the #return:from:
> > >> > >method:
> > >> > > > >it
> > >> > > > > > >>>>only checks whether aSender is dead but ignores the
> > >> > >possibility
> > >> > > > >that
> > >> > > > > > >>>>aSender sender may be nil or dead in which cases the VM
> > >>also
> > >> > > > > > >>>>responds with sending #cannotReturn, hence I assume the
> > >> > >simulator
> > >> > > > > > >>>>should do the same. In addition, the VM nills the pc in
> > >>such
> > >> > > > > > >>>>scenario, so I added the same functionality here too:
> > >> > > > > > >>>>
> > >> > > > > > >>>>Context >> return: value from: aSender
> > >> > > > > > >>>> "For simulation. Roll back self to aSender and return
> > >>value
> > >> > > > > > >>>>from it. Execute any unwind blocks on the way. ASSUMES
> > >> > >aSender is
> > >> > > > > > >>>>a sender of self"
> > >> > > > > > >>>>
> > >> > > > > > >>>> | newTop |
> > >> > > > > > >>>> newTop := aSender sender.
> > >> > > > > > >>>> (aSender isDead or: [newTop isNil or: [newTop isDead]])
> > >> > >ifTrue:
> > >> > > > > > >>>> "<--------- this is extended ------"
> > >> > > > > > >>>> [^self pc: nil; send: #cannotReturn: to: self with:
> > >> > > > > > >>>>{value}]. "<------ pc: nil is added ----"
> > >> > > > > > >>>> (self findNextUnwindContextUpTo: newTop) ifNotNil:
> > >> > > > > > >>>> "Send #aboutToReturn:through: with nil as the second
> > >> > > > > > >>>>argument to avoid this bug:
> > >> > > > > > >>>> Cannot #stepOver '^2' in example '[^2] ensure: []'.
> > >> > > > > > >>>> See
> > >> > > > > >
> > >> > > > >
> > >> > >
> > >> >>>>http://lists.squeakfoundation.org/pipermail/squeak-dev/2022-June/220975.html
> > >> > > > > >
> > >> > > > >
> > >> > >
> > >> >>>><http://lists.squeakfoundation.org/pipermail/squeak-dev/2022-June/220975.html>"
> > >> > > > > > >>>> [^self send: #aboutToReturn:through: to: self with:
> > >>{value.
> > >> > > > > > >>>>nil}].
> > >> > > > > > >>>> self releaseTo: newTop.
> > >> > > > > > >>>> newTop ifNotNil: [newTop push: value].
> > >> > > > > > >>>> ^newTop
> > >> > > > > > >>>>
> > >> > > > > > >>>>In order for this to work #cannotReturn: has to be
> > >>modified
> > >> > >as in
> > >> > > > > > >>>>Kernel-jar.1537:
> > >> > > > > > >>>>
> > >> > > > > > >>>>Context >> cannotReturn: result
> > >> > > > > > >>>>
> > >> > > > > > >>>> closureOrNil ifNotNil: [^ self cannotReturn: result to:
> > >>self
> > >> > > > > > >>>>home sender].
> > >> > > > > > >>>> self error: 'Computation has been terminated!'
> > >> > > > > > >>>>"<----------- this has to be an Error -----"
> > >> > > > > > >>>>
> > >> > > > > > >>>>Then it almost works except when you keep stepping over
> > >>in
> > >> > >the
> > >> > > > > > >>>>example above, you get an MNU error on `self previousPc`
> > >>in
> > >> > > > > > >>>>#cannotReturn:to:` with your solution of the VM crash.
> > >>If you
> > >> > > > >don't
> > >> > > > > > >>>>mind I've amended your solution and added the final
> > >>context
> > >> > >where
> > >> > > > > > >>>>the computation couldn't return along with the pc:
> > >> > > > > > >>>>
> > >> > > > > > >>>>Context >> cannotReturn: result to: homeContext
> > >> > > > > > >>>> "The receiver tried to return result to homeContext
> > >>that
> > >> > >cannot
> > >> > > > > > >>>>be returned from.
> > >> > > > > > >>>> Capture the return context/pc in a BlockCannotReturn.
> > >>Nil
> > >> > >the pc
> > >> > > > > > >>>>to prevent repeat
> > >> > > > > > >>>> attempts and/or invalid continuation. Answer the result
> > >>of
> > >> > > > > > >>>>raising the exception."
> > >> > > > > > >>>>
> > >> > > > > > >>>> | exception previousPc |
> > >> > > > > > >>>> exception := BlockCannotReturn new.
> > >> > > > > > >>>> previousPc := pc ifNotNil: [self previousPc]. "<-----
> > >>here's
> > >> > >a
> > >> > > > > > >>>>fix ----"
> > >> > > > > > >>>> exception
> > >> > > > > > >>>> result: result;
> > >> > > > > > >>>> deadHome: homeContext;
> > >> > > > > > >>>> finalContext: self; "<----- here's the new state, if
> > >> > > > > > >>>>that's fine ----"
> > >> > > > > > >>>> pc: previousPc.
> > >> > > > > > >>>> pc := nil.
> > >> > > > > > >>>> ^exception signal
> > >> > > > > > >>>>
> > >> > > > > > >>>>Unfortunately, this is still not the end of the story:
> > >>there
> > >> > >are
> > >> > > > > > >>>>situations where #runUntilErrorOrReturnFrom: places the
> > >>two
> > >> > >guard
> > >> > > > > > >>>>contexts below the bottom context. And that is a problem
> > >> > >because
> > >> > > > > > >>>>when the method tries to remove the two guard contexts
> > >>before
> > >> > > > > > >>>>returning at the end it uses #stepToCalee to do the job
> > >>but
> > >> > >this
> > >> > > > > > >>>>unforotunately was (ab)using the above bug in
> > >>#return:from: -
> > >> > > > >I'll
> > >> > > > > > >>>>explain: #return:from: didn't check whether aSender
> > >>sender
> > >> > >was
> > >> > > > >nil
> > >> > > > > > >>>>and as a result it allowed to simulate a return to a
> > >>"nil
> > >> > > > >context"
> > >> > > > > > >>>>which was then (ab)used in the clean-up via #stepToCalee
> > >>in
> > >> > >the
> > >> > > > > > >>>>#runUntilErrorOrReturnFrom:.
> > >> > > > > > >>>>
> > >> > > > > > >>>>When I fixed the #return:from: bug, the
> > >> > > > >#runUntilErrorOrReturnFrom:
> > >> > > > > > >>>>cleanup of the guard contexts no longer works in that
> > >>very
> > >> > > > >special
> > >> > > > > > >>>>case where the guard contexts are below the bottom
> > >>context.
> > >> > > > >There's
> > >> > > > > > >>>>one case where this is being used: #terminateAggresively
> > >>by
> > >> > > > > > >>>>Christoph.
> > >> > > > > > >>>>
> > >> > > > > > >>>>If I'm right with this analysis, the
> > >> > >#runUntilErrorOrReturnFrom:
> > >> > > > > > >>>>should get fixed too but I'll be away now for a few days
> > >>and
> > >> > >I
> > >> > > > >won't
> > >> > > > > > >>>>be able to respond. If you or Christoph had a chance to
> > >>take
> > >> > >a
> > >> > > > >look
> > >> > > > > > >>>>at Kernel-jar.1538 and Kernel-jar.1537 I'd be very
> > >>grateful.
> > >> > >I
> > >> > > > >hope
> > >> > > > > > >>>>this super long message at least makes some sense :)
> > >> > > > > > >>>>Best,
> > >> > > > > > >>>>Jaromir
> > >> > > > > > >>>>
> > >> > > > > > >>>>[1] Kernel-jar.1538, Kernel-jar.1537
> > >> > > > > > >>>>[2] KernelTests-jar.447
> > >> > > > > > >>>>
> > >> > > > > > >>>>
> > >> > > > > > >>>>PS: Christoph,
> > >> > > > > > >>>>
> > >> > > > > > >>>>With Kernel-jar.1538 + Kernel-jar.1537 your example
> > >> > > > > > >>>>
> > >> > > > > > >>>>process :=
> > >> > > > > > >>>> [(c := thisContext) pc: nil.
> > >> > > > > > >>>> 2+3] newProcess.
> > >> > > > > > >>>>process runUntil: [:ctx | ctx selector =
> > >>#cannotReturn:].
> > >> > > > > > >>>>self assert: process suspendedContext sender sender = c.
> > >> > > > > > >>>>self assert: process suspendedContext arguments = {c}.
> > >> > > > > > >>>>
> > >> > > > > > >>>>works fine, I've just corrected your first assert.
> > >> > > > > > >>>>
> > >> > > > > > >>>>
> > >> > > > > > >>>>
> > >> > > > > > >>>>
> > >> > > > > > >>>>
> > >> > > > > > >>>>On 21-Nov-23 6:40:32 PM, "Eliot Miranda"
> > >> > > > ><eliot.miranda(a)gmail.com>
> > >> > > > > > >>>>wrote:
> > >> > > > > > >>>>
> > >> > > > > > >>>>>Hi Jaromir,
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>>On Nov 20, 2023, at 11:51 PM, Jaromir Matas
> > >> > > > ><mail(a)jaromir.net>
> > >> > > > > > >>>>>>wrote:
> > >> > > > > > >>>>>>
> > >> > > > > > >>>>>>
> > >> > > > > > >>>>>>Hi Eliot,
> > >> > > > > > >>>>>>Very elegant! Now I finally got what you meant exactly
> > >>:)
> > >> > > > >Thanks.
> > >> > > > > > >>>>>>
> > >> > > > > > >>>>>>Two questions:
> > >> > > > > > >>>>>>1. in order for the enclosed test to work I'd need an
> > >>Error
> > >> > > > > > >>>>>>instead of Processor debugWithTitle:full: call in
> > >> > > > >#cannotReturn:.
> > >> > > > > > >>>>>>Otherwise I don't know how to catch a plain invocation
> > >>of
> > >> > >the
> > >> > > > > > >>>>>>Debugger:
> > >> > > > > > >>>>>>
> > >> > > > > > >>>>>>cannotReturn: result
> > >> > > > > > >>>>>>
> > >> > > > > > >>>>>> closureOrNil ifNotNil: [^ self cannotReturn: result
> > >>to:
> > >> > >self
> > >> > > > > > >>>>>>home sender].
> > >> > > > > > >>>>>> self error: 'Computation has been terminated!'
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>Much nicer.
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>>2. We are capturing a pc of self which is completely
> > >> > >different
> > >> > > > > > >>>>>>context from homeContext indeed.
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>Right. The return is attempted from a specific return
> > >> > >bytecode
> > >> > > > >in a
> > >> > > > > > >>>>>specific block. This is the coordinate of the return
> > >>that
> > >> > >cannot
> > >> > > > >be
> > >> > > > > > >>>>>made. This is the relevant point of origin of the
> > >>cannot
> > >> > >return
> > >> > > > > > >>>>>exception.
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>Why the return fails is another matter:
> > >> > > > > > >>>>>- the home context’s sender is a dead context (cannot
> > >>be
> > >> > > > >resumed)
> > >> > > > > > >>>>>- the home context’s sender is nil (home already
> > >>returned
> > >> > >from)
> > >> > > > > > >>>>>- the block activation’s home is nil rather than a
> > >>context
> > >> > > > >(should
> > >> > > > > > >>>>>not happen)
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>But in all these cases the pc of the home context is
> > >> > >immaterial.
> > >> > > > > > >>>>>The hike is being returned through/from, rather than
> > >>from;
> > >> > >the
> > >> > > > > > >>>>>home’s pc is not relevant.
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>>Maybe we could capture self in the exception too to
> > >>make it
> > >> > > > >more
> > >> > > > > > >>>>>>clear/explicit what is going on: what context the
> > >>captured
> > >> > >pc
> > >> > > > >is
> > >> > > > > > >>>>>>actually associated with. Just a thought...
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>Yes, I like that. I also like the idea of somehow
> > >>passing
> > >> > >the
> > >> > > > > > >>>>>block activation’s pc to the debugger so that the
> > >>relevant
> > >> > > > >return
> > >> > > > > > >>>>>expression is highlighted in the debugger.
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>>
> > >> > > > > > >>>>>>Thanks again,
> > >> > > > > > >>>>>>Jaromir
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>You’re welcome. I love working in this part of the
> > >>system.
> > >> > > > >Thanks
> > >> > > > > > >>>>>for dragging me there. I’m in a slump right now and
> > >> > >appreciate
> > >> > > > >the
> > >> > > > > > >>>>>fellowship.
> > >> > > > > > >>>>>
> > >> > > > > > >>>>>>------ Original Message ------
> > >> > > > > > >>>>>>From "Eliot Miranda" <eliot.miranda(a)gmail.com>
> > >> > > > > > >>>>>>To "Jaromir Matas" <mail(a)jaromir.net>
> > >> > > > > > >>>>>>Cc squeak-dev(a)lists.squeakfoundation.org
> > >> > > > > > >>>>>>Date 11/21/2023 2:17:21 AM
> > >> > > > > > >>>>>>Subject Re: Re[2]: [squeak-dev] Re: Resuming on
> > >> > > > >BlockCannotReturn
> > >> > > > > > >>>>>>exception
> > >> > > > > > >>>>>>
> > >> > > > > > >>>>>>>Hi Jaromir,
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>> see Kernel-eem.1535 for what I was suggesting. This
> > >> > >example
> > >> > > > > > >>>>>>>now has an exception with the right pc value in it:
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>[[^1] on: BlockCannotReturn do: [:ex| ex pc inspect.
> > >>ex
> > >> > > > >resume]]
> > >> > > > > > >>>>>>>fork
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>The fix is simply
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>Context>>cannotReturn: result to: homeContext
> > >> > > > > > >>>>>>> "The receiver tried to return result to homeContext
> > >>that
> > >> > > > > > >>>>>>>cannot be returned from.
> > >> > > > > > >>>>>>> Capture the return pc in a BlockCannotReturn. Nil
> > >>the pc
> > >> > >to
> > >> > > > > > >>>>>>>prevent repeat
> > >> > > > > > >>>>>>> attempts and/or invalid continuation. Answer the
> > >>result
> > >> > >of
> > >> > > > > > >>>>>>>raising the exception."
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>> | exception |
> > >> > > > > > >>>>>>> exception := BlockCannotReturn new.
> > >> > > > > > >>>>>>> exception
> > >> > > > > > >>>>>>> result: result;
> > >> > > > > > >>>>>>> deadHome: homeContext;
> > >> > > > > > >>>>>>> pc: self previousPc.
> > >> > > > > > >>>>>>> pc := nil.
> > >> > > > > > >>>>>>> ^exception signal
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>The VM crash is now avoided. The debugger displays
> > >>the
> > >> > >method,
> > >> > > > > > >>>>>>>but does not highlight the offending pc, which is no
> > >>big
> > >> > >deal.
> > >> > > > >A
> > >> > > > > > >>>>>>>suitable defaultHandler for B lockCannotReturn may be
> > >>able
> > >> > >to
> > >> > > > >get
> > >> > > > > > >>>>>>>the debugger to highlight correctly on opening. Try
> > >>the
> > >> > > > > > >>>>>>>following examples:
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>[[^1] on: BlockCannotReturn do: #resume] fork.
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>[[^1] on: BlockCannotReturn do: [:ex| ex pc inspect.
> > >>ex
> > >> > > > >resume]]
> > >> > > > > > >>>>>>>fork
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>[[^1] value] fork.
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>They al; seem to behave perfectly acceptably to me.
> > >>Does
> > >> > >this
> > >> > > > > > >>>>>>>fix work for you?
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>On Fri, Nov 17, 2023 at 3:14 PM Jaromir Matas
> > >> > > > ><mail(a)jaromir.net>
> > >> > > > > > >>>>>>>wrote:
> > >> > > > > > >>>>>>>>Hi Eliot,
> > >> > > > > > >>>>>>>>
> > >> > > > > > >>>>>>>>How about to nil the pc just before making the
> > >>return:
> > >> > > > > > >>>>>>>>```
> > >> > > > > > >>>>>>>>Context >> #cannotReturn: result
> > >> > > > > > >>>>>>>>
> > >> > > > > > >>>>>>>> self push: self pc. "backup the pc for the sake of
> > >> > > > > > >>>>>>>>debugging"
> > >> > > > > > >>>>>>>> closureOrNil ifNotNil: [^self cannotReturn: result
> > >>to:
> > >> > >self
> > >> > > > > > >>>>>>>>home sender; pc: nil].
> > >> > > > > > >>>>>>>> Processor debugWithTitle: 'Computation has been
> > >> > >terminated!'
> > >> > > > > > >>>>>>>>translated full: false
> > >> > > > > > >>>>>>>>```
> > >> > > > > > >>>>>>>>The nilled pc should not even potentially interfere
> > >>with
> > >> > >the
> > >> > > > > > >>>>>>>>#isDead now.
> > >> > > > > > >>>>>>>>
> > >> > > > > > >>>>>>>>I hope this is at least a step in the right
> > >>direction :)
> > >> > > > > > >>>>>>>>
> > >> > > > > > >>>>>>>>However, there's still a problem when debugging the
> > >> > > > >resumption
> > >> > > > > > >>>>>>>>of #cannotReturn because the encoders expect a
> > >>reasonable
> > >> > > > >index.
> > >> > > > > > >>>>>>>>I haven't figured out yet where to place a nil check
> > >>-
> > >> > >#step,
> > >> > > > > > >>>>>>>>#stepToSendOrReturn... ?
> > >> > > > > > >>>>>>>>
> > >> > > > > > >>>>>>>>Thanks again,
> > >> > > > > > >>>>>>>>Jaromir
> > >> > > > > > >>>>>>>>
> > >> > > > > > >>>>>>>>
> > >> > > > > > >>>>>>>>------ Original Message ------
> > >> > > > > > >>>>>>>>From "Eliot Miranda" <eliot.miranda(a)gmail.com>
> > >> > > > > > >>>>>>>>To "Jaromir Matas" <mail(a)jaromir.net>
> > >> > > > > > >>>>>>>>Date 11/17/2023 8:36:50 PM
> > >> > > > > > >>>>>>>>Subject Re: [squeak-dev] Re: Resuming on
> > >> > >BlockCannotReturn
> > >> > > > > > >>>>>>>>exception
> > >> > > > > > >>>>>>>>
> > >> > > > > > >>>>>>>>>Hi Jaromir,
> > >> > > > > > >>>>>>>>>
> > >> > > > > > >>>>>>>>>>On Nov 17, 2023, at 7:05 AM, Jaromir Matas
> > >> > > > ><mail(a)jaromir.net>
> > >> > > > > > >>>>>>>>>>wrote:
> > >> > > > > > >>>>>>>>>>
> > >> > > > > > >>>>>>>>>>
> > >> > > > > > >>>>>>>>>>Eliot, hi again,
> > >> > > > > > >>>>>>>>>>
> > >> > > > > > >>>>>>>>>>Please disregard my previous comment about nilling
> > >>the
> > >> > > > > > >>>>>>>>>>contexts that have returned. We are indeed talking
> > >> > >about
> > >> > > > >the
> > >> > > > > > >>>>>>>>>>context directly under the #cannotReturn context
> > >>which
> > >> > >is
> > >> > > > > > >>>>>>>>>>totally different from the home context in another
> > >> > >thread
> > >> > > > > > >>>>>>>>>>that's gone.
> > >> > > > > > >>>>>>>>>>
> > >> > > > > > >>>>>>>>>>I may still be confused but would nilling the pc
> > >>of the
> > >> > > > > > >>>>>>>>>>context directly under the cannotReturn context
> > >>help?
> > >> > > > >Here's
> > >> > > > > > >>>>>>>>>>what I mean:
> > >> > > > > > >>>>>>>>>>```
> > >> > > > > > >>>>>>>>>>Context >> #cannotReturn: result
> > >> > > > > > >>>>>>>>>>
> > >> > > > > > >>>>>>>>>> closureOrNil ifNotNil: [^self pc: nil;
> > >>cannotReturn:
> > >> > > > > > >>>>>>>>>>result to: self home sender].
> > >> > > > > > >>>>>>>>>> Processor debugWithTitle: 'Computation has been
> > >> > > > > > >>>>>>>>>>terminated!' translated full: false.
> > >> > > > > > >>>>>>>>>>```
> > >> > > > > > >>>>>>>>>>Instead of crashing the VM invokes the debugger
> > >>with
> > >> > >the
> > >> > > > > > >>>>>>>>>>'Computation has been terminated!' message.
> > >> > > > > > >>>>>>>>>>
> > >> > > > > > >>>>>>>>>>Does this make sense?
> > >> > > > > > >>>>>>>>>
> > >> > > > > > >>>>>>>>>Nearly. But it loses the information on what the pc
> > >> > >actually
> > >> > > > > > >>>>>>>>>is, and that’s potentially vital information. So
> > >>IMO the
> > >> > >ox
> > >> > > > > > >>>>>>>>>should only be nilled between the BlockCannotReturn
> > >> > > > >exception
> > >> > > > > > >>>>>>>>>being created and raised.
> > >> > > > > > >>>>>>>>>
> > >> > > > > > >>>>>>>>>[But if you try this don’t be surprised if it
> > >>causes a
> > >> > >few
> > >> > > > > > >>>>>>>>>temporary problems. It looks to me that without a
> > >>little
> > >> > > > > > >>>>>>>>>refactoring this could easily cause an infinite
> > >> > >recursion
> > >> > > > > > >>>>>>>>>around the sending of isDead. I’m sure you’ll be
> > >>able to
> > >> > >fix
> > >> > > > > > >>>>>>>>>the code to work correctly]
> > >> > > > > > >>>>>>>>>
> > >> > > > > > >>>>>>>>>>Thanks,
> > >> > > > > > >>>>>>>>>>Jaromir
> > >> > > > > > >>>>>>>>>>
> > >> > > > > > >>>>>>>>>>
> > >> > > > > > >>>>>>>>>>------ Original Message ------
> > >> > > > > > >>>>>>>>>>From "Jaromir Matas" <mail(a)jaromir.net>
> > >> > > > > > >>>>>>>>>>To "Eliot Miranda" <eliot.miranda(a)gmail.com>;
> > >>"The
> > >> > > > > > >>>>>>>>>>general-purpose Squeak developers list"
> > >> > > > > > >>>>>>>>>><squeak-dev(a)lists.squeakfoundation.org>
> > >> > > > > > >>>>>>>>>>Date 11/17/2023 10:15:17 AM
> > >> > > > > > >>>>>>>>>>Subject [squeak-dev] Re: Resuming on
> > >>BlockCannotReturn
> > >> > > > > > >>>>>>>>>>exception
> > >> > > > > > >>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>Hi Eliot,
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>------ Original Message ------
> > >> > > > > > >>>>>>>>>>>From "Eliot Miranda" <eliot.miranda(a)gmail.com>
> > >> > > > > > >>>>>>>>>>>To "Jaromir Matas" <mail(a)jaromir.net>
> > >> > > > > > >>>>>>>>>>>Cc "The general-purpose Squeak developers list"
> > >> > > > > > >>>>>>>>>>><squeak-dev(a)lists.squeakfoundation.org>
> > >> > > > > > >>>>>>>>>>>Date 11/16/2023 11:52:45 PM
> > >> > > > > > >>>>>>>>>>>Subject Re: Re[2]: [squeak-dev] Re: Resuming on
> > >> > > > > > >>>>>>>>>>>BlockCannotReturn exception
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>Hi Jaromir,
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>On Thu, Nov 16, 2023 at 2:22 PM Jaromir Matas
> > >> > > > > > >>>>>>>>>>>><mail(a)jaromir.net> wrote:
> > >> > > > > > >>>>>>>>>>>>>Hi Nicolas, Eliot,
> > >> > > > > > >>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>here's what I understand is happening (see the
> > >> > >enclosed
> > >> > > > > > >>>>>>>>>>>>>screenshot):
> > >> > > > > > >>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>1) we fork a new process to evaluate [^1]
> > >> > > > > > >>>>>>>>>>>>>2) the new process evaluates [^1] which means
> > >> > > > >instruction
> > >> > > > > > >>>>>>>>>>>>>18 is being evaluated, hence pc points to
> > >> > >instruction 19
> > >> > > > > > >>>>>>>>>>>>>now
> > >> > > > > > >>>>>>>>>>>>>3) however, the home context where ^1 should
> > >>return
> > >> > >to
> > >> > > > >is
> > >> > > > > > >>>>>>>>>>>>>gone by this time (the process that executed
> > >>the
> > >> > >fork
> > >> > > > >has
> > >> > > > > > >>>>>>>>>>>>>already returned - notice the two up arrows in
> > >>the
> > >> > > > >debugger
> > >> > > > > > >>>>>>>>>>>>>screenshot)
> > >> > > > > > >>>>>>>>>>>>>4) the VM can't finish the instruction and
> > >>returns
> > >> > > > >control
> > >> > > > > > >>>>>>>>>>>>>to the image via placing the #cannotReturn:
> > >>context
> > >> > >on
> > >> > > > >top
> > >> > > > > > >>>>>>>>>>>>>of the [^1] context
> > >> > > > > > >>>>>>>>>>>>>5) #cannotReturn: evaluation results in
> > >>signalling
> > >> > >the
> > >> > > > >BCR
> > >> > > > > > >>>>>>>>>>>>>exception which is then handled by the #resume
> > >> > >handler
> > >> > > > > > >>>>>>>>>>>>> (in our debugged case the [:ex | self halt. ex
> > >> > >resume]
> > >> > > > > > >>>>>>>>>>>>>handler)
> > >> > > > > > >>>>>>>>>>>>>6) ex resume is evaluated, however, this means
> > >> > > > >requesting
> > >> > > > > > >>>>>>>>>>>>>the VM to evaluate instruction 19 of the [^1]
> > >> > >context -
> > >> > > > > > >>>>>>>>>>>>>which is past the last instruction of the
> > >>context
> > >> > >and
> > >> > > > >the
> > >> > > > > > >>>>>>>>>>>>>crash ensues
> > >> > > > > > >>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>I wonder whether such situations could/should
> > >>be
> > >> > > > >prevented
> > >> > > > > > >>>>>>>>>>>>>inside the VM or whether such an expectation is
> > >> > >wrong
> > >> > > > >for
> > >> > > > > > >>>>>>>>>>>>>some reason.
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>As Nicolas says, IMO this is best done at the
> > >>image
> > >> > > > >level.
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>It could be prevented in the VM, but at great
> > >>cost,
> > >> > >and
> > >> > > > >only
> > >> > > > > > >>>>>>>>>>>>partially. The performance issue is that the
> > >>last
> > >> > > > >bytecode
> > >> > > > > > >>>>>>>>>>>>in a method is not marked in any way, and that
> > >>to
> > >> > > > >determine
> > >> > > > > > >>>>>>>>>>>>the last bytecode the bytecodes must be
> > >>symbolically
> > >> > > > > > >>>>>>>>>>>>evaluated from the start of the method. See
> > >> > >implementors
> > >> > > > >of
> > >> > > > > > >>>>>>>>>>>>endPC at the image level (which defer to the
> > >>method
> > >> > > > >trailer)
> > >> > > > > > >>>>>>>>>>>>and implementors of endPCOf: in the VMMaker
> > >>code.
> > >> > >Doing
> > >> > > > >this
> > >> > > > > > >>>>>>>>>>>>every time execution commences is prohibitively
> > >> > > > >expensive.
> > >> > > > > > >>>>>>>>>>>>The "only partially" issue is that following the
> > >> > >return
> > >> > > > > > >>>>>>>>>>>>instruction may be other valid bytecodes, but
> > >>these
> > >> > >are
> > >> > > > >not
> > >> > > > > > >>>>>>>>>>>>a continuation.
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>Consider the following code in some block:
> > >> > > > > > >>>>>>>>>>>> [self expression ifTrue:
> > >> > > > > > >>>>>>>>>>>> [^1].
> > >> > > > > > >>>>>>>>>>>> ^2
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>The bytecodes for this are
> > >> > > > > > >>>>>>>>>>>> pushReceiver
> > >> > > > > > >>>>>>>>>>>> send #expression
> > >> > > > > > >>>>>>>>>>>> jumpFalse L1
> > >> > > > > > >>>>>>>>>>>> push 1
> > >> > > > > > >>>>>>>>>>>> methodReturnTop
> > >> > > > > > >>>>>>>>>>>>L1
> > >> > > > > > >>>>>>>>>>>> push 2
> > >> > > > > > >>>>>>>>>>>> methodReturnTop
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>Clearly if expression is true these should be
> > >>*no*
> > >> > > > > > >>>>>>>>>>>>continuation in which ^2 is executed.
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>Well, in that case there's a bug because the
> > >> > >computation
> > >> > > > >in
> > >> > > > > > >>>>>>>>>>>the following example shouldn't continue past the
> > >>[^1]
> > >> > > > >block
> > >> > > > > > >>>>>>>>>>>but it silently does:
> > >> > > > > > >>>>>>>>>>>`[[true ifTrue: [^ 1]] on: BlockCannotReturn do:
> > >> > >#resume ]
> > >> > > > > > >>>>>>>>>>>fork`
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>The bytecodes are
> > >> > > > > > >>>>>>>>>>> push true
> > >> > > > > > >>>>>>>>>>> jumpFalse L1
> > >> > > > > > >>>>>>>>>>> push 1
> > >> > > > > > >>>>>>>>>>> returnTop
> > >> > > > > > >>>>>>>>>>>L1
> > >> > > > > > >>>>>>>>>>> push nil
> > >> > > > > > >>>>>>>>>>> blockReturn
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>So even if the VM did try and detect whether the
> > >> > >return
> > >> > > > >was
> > >> > > > > > >>>>>>>>>>>>at the last block method, it would only work for
> > >> > >special
> > >> > > > > > >>>>>>>>>>>>cases.
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>It seems to me the issue is simply that the
> > >>context
> > >> > >that
> > >> > > > > > >>>>>>>>>>>>cannot be returned from should be marked as dead
> > >>(see
> > >> > > > > > >>>>>>>>>>>>Context>>isDead) by setting its pc to nil at
> > >>some
> > >> > >point,
> > >> > > > > > >>>>>>>>>>>>presumably after copying the actual return pc
> > >>into
> > >> > >the
> > >> > > > > > >>>>>>>>>>>>BlockCannotReturn exception, to avoid ever
> > >>trying to
> > >> > > > >resume
> > >> > > > > > >>>>>>>>>>>>the context.
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>Does this mean, in other words, that every
> > >>context
> > >> > >that
> > >> > > > > > >>>>>>>>>>>returns should nil its pc to avoid being
> > >>"wrongly"
> > >> > > > > > >>>>>>>>>>>reused/executed in the future, which concerns
> > >> > >primarily
> > >> > > > >those
> > >> > > > > > >>>>>>>>>>>being referenced somewhere hence potentially
> > >> > >executable in
> > >> > > > > > >>>>>>>>>>>the future, is that right?
> > >> > > > > > >>>>>>>>>>>Hypothetical question: would nilling the pc
> > >>during
> > >> > >returns
> > >> > > > > > >>>>>>>>>>>"fix" the example?
> > >> > > > > > >>>>>>>>>>>Thanks a lot for helping me understand this.
> > >> > > > > > >>>>>>>>>>>Best,
> > >> > > > > > >>>>>>>>>>>Jaromir
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>Thanks,
> > >> > > > > > >>>>>>>>>>>>>Jaromir
> > >> > > > > > >>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>><bdxuqalu.png>
> > >> > > > > > >>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>------ Original Message ------
> > >> > > > > > >>>>>>>>>>>>>From "Eliot Miranda"
> > >><eliot.miranda(a)gmail.com>
> > >> > > > > > >>>>>>>>>>>>>To "Jaromir Matas" <mail(a)jaromir.net>; "The
> > >> > > > >general-purpose
> > >> > > > > > >>>>>>>>>>>>>Squeak developers list"
> > >> > > > > > >>>>>>>>>>>>><squeak-dev(a)lists.squeakfoundation.org>
> > >> > > > > > >>>>>>>>>>>>>Date 11/16/2023 6:48:43 PM
> > >> > > > > > >>>>>>>>>>>>>Subject Re: [squeak-dev] Re: Resuming on
> > >> > > > >BlockCannotReturn
> > >> > > > > > >>>>>>>>>>>>>exception
> > >> > > > > > >>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>Hi Jaromir,
> > >> > > > > > >>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>On Nov 16, 2023, at 3:23 AM, Jaromir Matas
> > >> > > > > > >>>>>>>>>>>>>>><mail(a)jaromir.net> wrote:
> > >> > > > > > >>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>Hi Nicloas,
> > >> > > > > > >>>>>>>>>>>>>>>No no, I don't have any practical scenario in
> > >> > >mind,
> > >> > > > >I'm
> > >> > > > > > >>>>>>>>>>>>>>>just trying to understand why the VM is
> > >> > >implemented
> > >> > > > >like
> > >> > > > > > >>>>>>>>>>>>>>>this, whether there were a reason to leave
> > >>this
> > >> > > > > > >>>>>>>>>>>>>>>possibility of a crash, e.g. it would slow
> > >>down
> > >> > >the VM
> > >> > > > >to
> > >> > > > > > >>>>>>>>>>>>>>>try to prevent such a dumb situation (who
> > >>would
> > >> > >resume
> > >> > > > > > >>>>>>>>>>>>>>>from BCR in his right mind? :) ) - or perhaps
> > >>I
> > >> > >have
> > >> > > > > > >>>>>>>>>>>>>>>overlooked some good reason to even keep this
> > >> > >behavior
> > >> > > > >in
> > >> > > > > > >>>>>>>>>>>>>>>the VM. That's all.
> > >> > > > > > >>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>Let’s first understand what’s really
> > >>happening.
> > >> > > > >Presumably
> > >> > > > > > >>>>>>>>>>>>>>at tone point a context is resumed those pc is
> > >> > >already
> > >> > > > >at
> > >> > > > > > >>>>>>>>>>>>>>the block return bytecode (effectively,
> > >>because it
> > >> > > > >crashes
> > >> > > > > > >>>>>>>>>>>>>>in JITted code, but I bet the stack vm will
> > >>crash
> > >> > >also,
> > >> > > > > > >>>>>>>>>>>>>>but not as cleanly - it will try and execute
> > >>the
> > >> > >bytes
> > >> > > > >in
> > >> > > > > > >>>>>>>>>>>>>>the encoded method trailer). So which method
> > >> > >actually
> > >> > > > > > >>>>>>>>>>>>>>sends resume, and to what, and what state is
> > >> > >resume’s
> > >> > > > > > >>>>>>>>>>>>>>receiver when resume is sent?
> > >> > > > > > >>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>Thanks for your reply.
> > >> > > > > > >>>>>>>>>>>>>>>Regards,
> > >> > > > > > >>>>>>>>>>>>>>>Jaromir
> > >> > > > > > >>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>------ Original Message ------
> > >> > > > > > >>>>>>>>>>>>>>>From "Nicolas Cellier"
> > >> > > > > > >>>>>>>>>>>>>>><nicolas.cellier.aka.nice(a)gmail.com>
> > >> > > > > > >>>>>>>>>>>>>>>To "Jaromir Matas" <mail(a)jaromir.net>; "The
> > >> > > > > > >>>>>>>>>>>>>>>general-purpose Squeak developers list"
> > >> > > > > > >>>>>>>>>>>>>>><squeak-dev(a)lists.squeakfoundation.org>
> > >> > > > > > >>>>>>>>>>>>>>>Date 11/16/2023 7:20:20 AM
> > >> > > > > > >>>>>>>>>>>>>>>Subject Re: [squeak-dev] Resuming on
> > >> > >BlockCannotReturn
> > >> > > > > > >>>>>>>>>>>>>>>exception
> > >> > > > > > >>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>>Hi Jaromir,
> > >> > > > > > >>>>>>>>>>>>>>>>Is there a scenario where it would make
> > >>sense to
> > >> > > > >resume
> > >> > > > > > >>>>>>>>>>>>>>>>a BlockCannotReturn?
> > >> > > > > > >>>>>>>>>>>>>>>>If not, I would suggest to protect at image
> > >>side
> > >> > >and
> > >> > > > > > >>>>>>>>>>>>>>>>override #resume.
> > >> > > > > > >>>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>>Le mer. 15 nov. 2023, 23:42, Jaromir Matas
> > >> > > > > > >>>>>>>>>>>>>>>><mail(a)jaromir.net> a écrit :
> > >> > > > > > >>>>>>>>>>>>>>>>>Hi Eliot, Christoph, All,
> > >> > > > > > >>>>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>>>It's known the following example crashes
> > >>the VM.
> > >> > >Is
> > >> > > > > > >>>>>>>>>>>>>>>>>this an intended behavior or a "tolerated
> > >>bug"?
> > >> > > > > > >>>>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>>>`[[^ 1] on: BlockCannotReturn do: #resume]
> > >>fork`
> > >> > > > > > >>>>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>>>I understand why it crashes: the non-local
> > >> > >return
> > >> > > > >has
> > >> > > > > > >>>>>>>>>>>>>>>>>nowhere to return to and so resuming the
> > >> > >computation
> > >> > > > > > >>>>>>>>>>>>>>>>>leads to a crash. But why not raise another
> > >>BCR
> > >> > > > > > >>>>>>>>>>>>>>>>>exception to prevent the crash? Potential
> > >> > >infinite
> > >> > > > > > >>>>>>>>>>>>>>>>>loop? Perhaps I'm just missing the purpose
> > >>of
> > >> > >this
> > >> > > > > > >>>>>>>>>>>>>>>>>behavior...
> > >> > > > > > >>>>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>>>Thanks for an explanation.
> > >> > > > > > >>>>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>>>Best,
> > >> > > > > > >>>>>>>>>>>>>>>>>Jaromir
> > >> > > > > > >>>>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>>>--
> > >> > > > > > >>>>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>>>Jaromir Matas
> > >> > > > > > >>>>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>
> > >> > > > > > >>>>>>>>>>>>--
> > >> > > > > > >>>>>>>>>>>>_,,,^..^,,,_
> > >> > > > > > >>>>>>>>>>>>best, Eliot
> > >> > > > > > >>>>>>>>>><Context-cannotReturn.st>
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>
> > >> > > > > > >>>>>>>--
> > >> > > > > > >>>>>>>_,,,^..^,,,_
> > >> > > > > > >>>>>>>best, Eliot
> > >> > > > > > >>>>>><ProcessTest-testResumeAfterBCR.st>